-
Feel free to contact us: Mobile: 0344 3813810 Versatile multimeter for manufacturing, development and service applications- 5.5 digit resolution
- Basic V dc accuracy of 0.01 %
- Dual display
- Dedicated dc leakage current measurement
- 2×4 ohms 4-wire measurement technique
- Six dedicated buttons for fast access to instrument setups
- Hi/Lo limit compare for Pass/Fail testing
- Meter
- TL71 test leads
- Line cord
- Spare line fuse
- Statement of cal practices
- WEEE information sheet
- Warranty statement
- Getting Started guide (English, French, German, Spanish, Italian, Simplified Chinese, Japanese)
- CD Rom with user manual (English)
-
Feel free to contact us: Mobile: 0344 3813810 Record three-phase power quality and monitor for power quality disturbances with the new Fluke 1750 Three Phase Power Recorder and the Fluke Power Analyzer software. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Never miss capturing a disturbance – with the exclusive threshold-free measurement system, it’s automatic. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Three Phase Power Recorder. Unprecedented accuracy and resolution provide complete visibility into your distribution system. The recorder automatically detects, scales, and powers current probes without needing batteries. Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range – no more uncertainty that data is being recorded. The Fluke 1750 Three Phase Power Quality Recorder has an exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment. The PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. The built-in wireless technology allows you to control multiple instruments from a distance easily, without the need for a laptop computer (laptops can also be used when desired). Applications: Long-term analysis: Uncover hard-to-find or intermittent issues Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports Quality of service compliance: Validate incoming power quality at the service entrance Semi-permanent monitoring: Monitor critical equipment, capturing power quality events to correlate with equipment malfunctions What’s Included:- 1750 aquisition unit
- PDA wireless “front panel interface” and charger power plug adapters
- 4 – 400A current probes (3140)
- 5 Test leads and clips
- SD memory card
- Fluke Power View and Fluke Power Analyze software
- Power cord with international plug set
- Ethernet cable
- Color localization set
- Printed Getting Started manual
- Product CD with software and user manual PDF
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues. The Fluke 1743 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:- V, A, W, VA, VAR
- Power Factor
- Energy
- Flicker
- Voltage
- THD
- The Fluke 1744 includes the same features as the Fluke 1743 but can measure voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.
- The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.
- Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
- Quality of service compliance – Validate incoming power quality at the service entrance
- Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
- Load studies – Verify electrical system capacity before adding loads
- Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
- 4 Flexible probes 15/150/1500/3000 A with 2 m cable
- CD-ROM with PQ Log software
- RS232 interface cable and RS232-USB adapter
- Test leads for voltages and power supply
- 4 black dolphin clips
- Color localization kit
- Carrying bag
- Test certificate with measurement values
- Printed English manual
- Multi-language manual CD
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810- True-RMS 1000A AC/DC
- Work in tight spots with the 18" iFlex current probe and measure up to 2500A AC
- CAT III/IV Safety ratings
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810- CAT IV 600
- CAT III 1000 V
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810- True-RMS
- 600 A AC/DC
- Works with iFlex flexible current probes
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810- Detachable Jaw clamp
- Built in Flash/Torch light
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810- CAT III Rating 600v
- Low Pass Filter
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 360 leakage tester is a rugged and accurate solution for leakage current measurement. Ideally designed for non-invasive checks of insulation condition, the Fluke 360 leakage meter allows you to perform tests without powering down the installation or disconnecting equipment – saving you time, without compromising on quality or safety. The unique jaw design of the Fluke 360 AC Leakage Current Clamp Meter eliminates the influence of adjacent current conductors, and measure leakage current down to 1 µA for monitoring of insulation and makes it ideal for checking insulation of low-voltage circuits and electrical components.. The ergonomic design of the Fluke 360 ensures easy measuring. The measuring clamp fits into tight spaces and the wide display angle clearly shows the measured value on the display after removing the clamp for the measured conductor. The Fluke 360 minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality jaw design of the Fluke 360 leakage tester guarantees high stability for long-term repeatability and durability. Why leakage current testing? Leakage currents can be an indicator of the effectiveness of insulation on conductors. High levels of leakage current may be present in circuits where either the insulation resistance is low, or electronic equipment with filters is used. Leakage currents can cause disruptions of the normal operation of equipment and installations. It is possible to locate the source of leakage currents by using the Fluke 360 leakage current clamp meter and taking methodical measurements throughout the installation. The big advantage of leakage current testing versus insulation testing is that the installation and equipment do not need to be powered down but can be done during normal operation. What’s Included:- Soft carrying pouch
- Users manual in languages: English, French, Spanish, German, Italian, Portuguese, Simplified Chinese
-
Feel free to contact us: Mobile: 0344 3813810 Industrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential. In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing this product to meet CAT IV 600 V and CAT III 1000 V ratings. Confidently take reliable readings with the Fluke 353 AC/DC True-rms Clamp Meter – the tool of choice for high-current clamp-on amp meter measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications and the extra rugged design has an extra element of user protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. Applications: Industrial plants and facilities Building maintenance, e.g. universities, hospitals, large offices, correctional institutions Plant works, e.g. power, pharmaceutical, printing, automotive assembly Manufacturing and process facilities Refineries Steel mills and other metal manufacturing plants Large DC systems such as DC electroplating, or marine electrical systems What’s Included: Fluke C43 Soft Carrying Case 6 AA batteries Users manual 3 year warranty -
Feel free to contact us: Mobile: 0344 3813810- Ideal for VSDs, UPS, lighting
- AC/DC with low pass filter
- Data logging records results
- 2 Years Warranty
-
Feel free to contact us: Mobile: 0344 3813810- Auto Power Off
- Weight 230 g (8oz)
- 2 Years Warranty
-
The Fluke 1625 is intended for electrical utility or other high frequency environments as it has extra versatility for more demanding applications. The Fluke 1625 is a distinctive earth ground tester that can perform all four types of earth ground measurement. Not only measure ground resistance using the classic ‘fall of potential test’ but also enable time saving testing using the ‘selective’ and ‘stakeless’ methods. ‘Selective’ testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple ‘stakeless’ method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test. Testing Methods- 3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
- 4-Pole Soil Resistivity testing – determine soil resistivity using four ground stakes
- Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
- Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
- Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
- R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
- Adjustable limits – for quick test result verification.
- Designing earth ground systems
- Installing new ground system and electrical equipment
- Periodically testing ground and lightning protection systems
- Installing large electrical equipment such as transformers, switchgears, machines, etc.
- Fluke 1625 tester
- 2 test leads
- 2 alligator clips
- 4 earth ground stakes
- 3 cable reels with wire (2-25 m, 1-50 m)
- selective/stakeless clamp set (one inducing, one sensing)
- Batteries
- Users manual
- Rugged carrying case
Call Us Today! (+92 307-7381381, +92 321-1818381) | buysolarpakistan@gmail.com
