-
Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair. The Fluke 175 True-rms digital multimeter has the features needed to find most electrical, electronic, electro-mechanical and heating and ventilation problems. Simple to use with significant improvements like True-rms, frequency, capacitance and min-max record. Check the features and specifications using the tabs above. Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. Want better accuracy and a backlight see the Fluke 177 Also available with temperature as Fluke 179 -
Feel free to contact us: Mobile: 0344 3813810 Record three-phase power quality and monitor for power quality disturbances with the new Fluke 1750 Three Phase Power Recorder and the Fluke Power Analyzer software. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Never miss capturing a disturbance – with the exclusive threshold-free measurement system, it’s automatic. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Three Phase Power Recorder. Unprecedented accuracy and resolution provide complete visibility into your distribution system. The recorder automatically detects, scales, and powers current probes without needing batteries. Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range – no more uncertainty that data is being recorded. The Fluke 1750 Three Phase Power Quality Recorder has an exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment. The PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. The built-in wireless technology allows you to control multiple instruments from a distance easily, without the need for a laptop computer (laptops can also be used when desired). Applications: Long-term analysis: Uncover hard-to-find or intermittent issues Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports Quality of service compliance: Validate incoming power quality at the service entrance Semi-permanent monitoring: Monitor critical equipment, capturing power quality events to correlate with equipment malfunctions What’s Included:- 1750 aquisition unit
- PDA wireless “front panel interface” and charger power plug adapters
- 4 – 400A current probes (3140)
- 5 Test leads and clips
- SD memory card
- Fluke Power View and Fluke Power Analyze software
- Power cord with international plug set
- Ethernet cable
- Color localization set
- Printed Getting Started manual
- Product CD with software and user manual PDF
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair. The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record. The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. Check the features and specifications using the tabs above. Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. Available as kits such as: Fluke 179/1AC-IIElectrician’s Multimeter and Voltage Tester Combo Kit or Fluke 179/61 Industrial Multimeter and Infrared Thermometer Combo Kit or Fluke 179/TPAK Digital Multimeter & ToolPak™ Combo Kit Also available with no temperature asFluke 177or as Fluke 175 Combo Kit includes:- Fluke 179 True-rms Digital Multimeter
- Fluke 80BK K-type temperature probe
- Fluke AC280 SureGrip Heavy Duty Hook Clips
- Fluke TP910 Electronic Test Probes
- Fluke TL224 SureGrip Silicone Test Leads resist heat
- Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
- NEW! Fluke C35 lightweight soft case to provide optimal protection and storage
- Fluke 179 True-rms Digital Multimeter
- Fluke 80BK K-type temperature probe
- Fluke AC280 SureGrip Heavy Duty Hook Clips
- Fluke TL910 Electronic Test Probes
- Fluke TL224 SureGrip Silicone Test Leads resist heat
- Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
- NEW! Fluke C35 lightweight soft case to provide optimal protection and storage
- Fluke 1621 Tester
- 2 cable reels with wire (1-50m, 1-25m)
- 3 earth ground stakes
- 1 Test lead (red and black 2m)
- 2 Alligator Clips
- Batteries
- Users manual
- Hard carrying case
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 The new Fluke 190-102 Series II ScopeMeter is a 2-channel portable hand held oscilloscope built for CAT III & IV environments. It easily works with 3-phase applications for many industrial applications like motors and variable speed drives and includes all the key features of the original Fluke 190 series ScopeMeters. The Fluke 190-102/AM model is a 100MHz bandwidth model that provides real-time sampling rates up to 1.25GS/s and a 400ps resolution to capture noise and other disturbances.Applications
- Automation: PLC’s, sensors, transducers, motion controllers, rotary encoders, scanners, readers, printers
- Medical Imaging: XRay, MRI, ultrasound imaging equipment
- Avionics: Flight line navigation systems, communication systems, radars, on board aircraft control systems
- A/V and Security Systems: Retail security devices, surveillance and monitoring equipment, RFID
Fluke 190 Series II ScopeMeters
The new 2-channel Fluke 190 series of portable oscilloscopes are designed for the industrial plant maintenance professionals servicing, installing or maintaining heavy duty electrical equipment, electro-mechanical machinery and plant automation control systems. The 190 series II ScopeMeters are the first portable oscilloscopes with a 1000 V CAT III / 600 V CAT IV safety rating. Fluke ScopeMeter test tools are hand held, battery operated portable instruments with a sealed, dust and drip proof case that is IP 51 rated, designed to be used in harsh environments. The new Fluke 190 series II now includes new features for troubleshooting today’s industrial power electronic systems and enhancements that will improve usability and overall satisfaction.New Features and Functions for Industrial Equipment Maintenance Applications
- IEC 61010 1000V CAT III / 600V CAT IV Safety rating
- 2 fully isolated floating input channels with up to 1.25 GS/s real time sampling rate
- 8ns Glitch detect
- 10,000 sample deep memory per channel for displaying high resolution waveform details
- 2 input channels provide: 2 meter measurements, 2 TrendPlot traces, 2 ScopeRecord traces, capturing or logging 2 inputs over time
- Live Zoom with full resolution
- Hi-capacity Li-ion battery with up to four hours of operation
- Battery access door to easily swap out batteries for extended operation
- Two electrically isolated USB ports. Mini USB-A for PC connectivity and a USB memory device port
- Security slot to lock down instrument using standard Kensignton PC lock
- Screen insert for standard camera mounting accessories
- Up to 100 MHz bandwidth, 1.25 GS/s real time sample rate up to 400 pico seconds resolution
- Built-in multimeter
- Connect and View to easily trigger on and display even complex waveforms
- TrendPlot and ScopeRecord to capture or plot waveforms and measurements over extended time spans
- Reply Last 100 Screen, to go back in time to see waveform anomalies
- Environmentally tested to meet IP51 dusty and drip proof rating and withstand 3G vibration or 30g shock
Other Fluke 190 Series II (2 Channel) models:
- Fluke 190-102/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke 190-062/AM – This is the 60MHz series model
- Fluke 190-062/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke 190-202/AM – This is the 200MHz series model
- Fluke 190-202/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke BC190 Power adapter
- Fluke BP290 Li-ion battery pack
- VPS410-R probe red
- VPS410-B probe blue
- USB cable A – B (mini)
- Hanging strap
- Handstrap affixed to instrument (user selectable for left or right handed use)
- CD user manual with FlukeView ScopeMeter software demo version
- Statement of calibration practice
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 Fluke 225C ScopeMeter is based on the 199C Color ScopeMeter. It includes all the key functionalty of that product but also includes the popular Bus Health Test feature of the Fluke 125 ScopeMeter. Bus Health Test offers powerful test capabilities for a wide variety of Industrial Bus systems. When in Bus Health Test mode, the Fluke 225C automatically makes an analysis of the electrical signals passing through the bus, and compares the parameters to industry standard values for that bus type. Alternatively, the user may select an ‘Eyepattern’ display to visually check the overall signal quality. Parameters are automatically qualified as ‘good’, ‘weak’ or ‘bad’ based on a comparison to the appropriate industrial standards or to user set reference values. Each of the measured parameters is presented with momentary value and with statistical minimum and maximum values measured over time. The reference values used are also displayed, to give the user an easier grip on the systems behavior. Tested parameters include signal amplitudes, bias voltage, rise- and fall-times, jitter, distortion and noise levels (in-band noise as well as out-of-band noise) depending on the requirements of the associated industry standard. Because the Fluke 225C ScopeMeter is based on the Fluke 199C ScopeMeter, it also offers 2Gs/S and 200MHz bandwidth. The Fluke 225C is also available as a kit which includes software, communications cable and carry case – this product is called the Fluke 225C/003S. -
Feel free to contact us: Mobile: 0344 3813810 The NEW Fluke 233 True-rms Remote Display Digital Multimeter gives you ultimate flexibility in unusual measurement scenarios. Place the removable display where you can see it and then put the meter where it is convenient for you—no more juggling of leads and the meter while stretching into a tight spot. You can now take measurements in hard-to-reach places, where machines or panels are physically separated from a limit or isolator switch, or in user prohibited areas such as clean rooms or hazardous areas. Imagine the possibilities! What would you do if you could be in two places at once?- True-rms ac voltage and current for accurate measurements on non-linear signals
- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 μF capacitance range
- Frequency to 50 kHz
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Resistance, continuity and diode test
- Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
- The removable magnetic display can be conveniently mounted where it is easily seen
- Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
- Use as a conventional multimeter when the display is connected
- Radio transmitter automatically turns off when the display is connected to the meter
- Auto power off maximizes battery life
- Min/Max and Average recording to capture variations automatically
- Test continuity and diodes
- Easy to read display with large digits and bright backlight
- Battery life approximately 400 hours
-
Feel free to contact us: Mobile: 0344 3813810 The new standard for rugged Fluke 27 II and Fluke 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
- Frequency to 200 kHz
- Extended ac voltage bandwidth – 40 Hz to 30 kHz
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
- Average responding voltage and current for measurements (Fluke 28-II is TRMS)
- Backlit keypad buttons allow for easy visibility in lowlit areas
- Large display digits and 2 level bright white backlight for increased visibility
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- Long battery life (800 hours)
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
- MSHA approval (pending)
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 28-II multimeter is the new standard for rugged Fluke 28 II digital multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Fluke 28-II has an IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. This meter is built to work in the toughest environments.- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
- Frequency to 200 kHz
- Extended ac voltage bandwidth – 40 Hz to 30 kHz
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- Peak min-max
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
- True-rms ac voltage and current for accurate measurements on non-linear loads
- Hi resolution 20,000 count display mode
- Backlit keypad buttons allow for easy visibility in lowlit areas
- Large display digits and 2 level bright white backlight for increased visibility
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- Long battery life (800 hours)
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
- MSHA approval (pending)
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its’ unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture packs more accuracy and convenience into a handheld multimeter than ever before, putting more problem solving power in your hands. It is the ultimate handheld tool for demanding applications that require high-precision APPLICATIONS:- Develop, install, or maintain electronic devices
- Precision testing of surface mount and high density circuits
- Customers who need to log and record results to solve intermittent problems
- Communication; wireless, wired, LAN, broadband, CATV, audio/video
- Industrial / Electrical equipment
- Instrumentation (example: test and medical equipment)
- Consumer electronics
- Automotive
- Education
- Security
- Manual
- 6 AA Batteries, installed
- TL71 Silicone Test Leads
- Probe Holder
- Two AC72 Alligator Clips
- Registration Card
- Cal Practices Document
- CD-ROM Users’ Manual (16 languages)
- Getting Started Manual
- Calibration Certification Sheet
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 The industrial meter for demanding users. New diagnostic functionality for maximizing productivity in the plant. The new Fluke 289 True-RMS Industrial Logging Multimeter with TrendCapture is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off solving other problems. Be sure to also check out the Fluke 287 True-RMS Electronics Logging Multimeter with TrendCapture designed for electronics professionals or the Fluke 289 and Fluke i400 Clamp Meter Combo Kit APPLICATIONS:- Install or maintaining electronic machinery/plant equipment
- Testing adjustable speed motor drives
- Log and record results
- In-plant automation applications
- Power distribution
- Electro-mechanical equipment service
- Industrial electronics
- Manual
- 6 AA Batteries, installed
- TL71 Silicone Test Leads
- Probe Holder
- Two AC72 Alligator Clips
- Registration Card
- Cal Practices Document
- CD-ROM Users’ Manual (16 languages)
- Getting Started Manual
- Calibration Certification Sheet
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810- Auto Power Off
- Weight 230 g (8oz)
- 2 Years Warranty
-
Feel free to contact us: Mobile: 0344 3813810- Ideal for VSDs, UPS, lighting
- AC/DC with low pass filter
- Data logging records results
- 2 Years Warranty
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads. The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics. With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms. The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads. Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems. Applications:- Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters
- Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment
- Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
- Load studies – Verify electrical system capacity before adding loads
- 345 Power Quality Clamp Meter
- Soft carrying case
- Power Log software
- Test leads
- Alligator clips
- Test probes
- USB cable
- International ac adapter / battery eliminator
- Printed English language user manual
- Multi-language manual CD
-
Feel free to contact us: Mobile: 0344 3813810 he Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads. The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics. With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms. The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads. Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems. Applications:- Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters
- Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment
- Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
- Load studies – Verify electrical system capacity before adding loads
- 345 Power Quality Clamp Meter
- Soft carrying case
- Power Log software
- Test leads
- Alligator clips
- Test probes
- USB cable
- International ac adapter / battery eliminator
- Printed English language user manual
- Multi-language manual CD
-
Feel free to contact us: Mobile: 0344 3813810 Industrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential. In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing this product to meet CAT IV 600 V and CAT III 1000 V ratings. Confidently take reliable readings with the Fluke 353 AC/DC True-rms Clamp Meter – the tool of choice for high-current clamp-on amp meter measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications and the extra rugged design has an extra element of user protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. Applications: Industrial plants and facilities Building maintenance, e.g. universities, hospitals, large offices, correctional institutions Plant works, e.g. power, pharmaceutical, printing, automotive assembly Manufacturing and process facilities Refineries Steel mills and other metal manufacturing plants Large DC systems such as DC electroplating, or marine electrical systems What’s Included: Fluke C43 Soft Carrying Case 6 AA batteries Users manual 3 year warranty -
Feel free to contact us: Mobile: 0344 3813810 The Fluke 360 leakage tester is a rugged and accurate solution for leakage current measurement. Ideally designed for non-invasive checks of insulation condition, the Fluke 360 leakage meter allows you to perform tests without powering down the installation or disconnecting equipment – saving you time, without compromising on quality or safety. The unique jaw design of the Fluke 360 AC Leakage Current Clamp Meter eliminates the influence of adjacent current conductors, and measure leakage current down to 1 µA for monitoring of insulation and makes it ideal for checking insulation of low-voltage circuits and electrical components.. The ergonomic design of the Fluke 360 ensures easy measuring. The measuring clamp fits into tight spaces and the wide display angle clearly shows the measured value on the display after removing the clamp for the measured conductor. The Fluke 360 minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality jaw design of the Fluke 360 leakage tester guarantees high stability for long-term repeatability and durability. Why leakage current testing? Leakage currents can be an indicator of the effectiveness of insulation on conductors. High levels of leakage current may be present in circuits where either the insulation resistance is low, or electronic equipment with filters is used. Leakage currents can cause disruptions of the normal operation of equipment and installations. It is possible to locate the source of leakage currents by using the Fluke 360 leakage current clamp meter and taking methodical measurements throughout the installation. The big advantage of leakage current testing versus insulation testing is that the installation and equipment do not need to be powered down but can be done during normal operation. What’s Included:- Soft carrying pouch
- Users manual in languages: English, French, Spanish, German, Italian, Portuguese, Simplified Chinese
-
Feel free to contact us: Mobile: 0344 3813810- Detachable Jaw clamp
- Built in Flash/Torch light
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810- True-RMS
- 600 A AC/DC
- Works with iFlex flexible current probes
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810- CAT IV 600
- CAT III 1000 V
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810- True-RMS 1000A AC/DC
- Work in tight spots with the 18" iFlex current probe and measure up to 2500A AC
- CAT III/IV Safety ratings
- 3 years Warranty
- CAT IV 600, CAT III 1000 V
- iFlex 2500 A AC
- 1000 V AC/DC
- mV DC
- 60 kΩ
- 1000 μF
- 18-inch iFlex flexible current probe – i2500-18
- TL75 test leads
- Coated instruction card
- Safety information sheet
- Soft carrying case
- Two AA Alkaline batteries
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 Pinpoint power problems faster, safer and in greater detail! The Fluke 434 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues. The Fluke 434 offers unique features like AutoTrend, which records everything on the screen automatically, and System-Monitor, a quick diagnosis of system performance against user defined limits and Logger Function (optional functionality can be added with upgrade kit Fluke 434/LOG). Together the features help to quickly diagnose problems and build benchmarks for predictive maintenance. The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality. Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 434 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes. Full measurement capability and the highest safety rating With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 434 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells. Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (8 MB) memory stores up to 50 screens and up to 10 measurements each comprising 32 parameters – including setups and trend data – recorded for more than a year, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports. If any of these situations apply to you, then this tool is for you:- Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online
- Predictive Maintenance – Detect and prevent power quality issues before they cause downtime
- Quality of Service Compliance – Validate incoming power quality at the service entrance
- Long-term Analysis – Uncover hard-to-find or intermittent issues
- Load Studies – Verify electrical system capacity before adding loads
- Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving devices
- Fluke C430 Hard carrying case
- Fluke i400s 4 current clamps, CAT IV 600 V
- Fluke TLS430 5 Test leads, 4 black, 1 green
- Fluke BC430 Battery Charger Eliminator
- FlukeView Software SW43W
- Fluke OC4USB Optical Cable for USB
- Fluke WC100 Color localization set
- Getting Started printed
- User Manual (CD-ROM)
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 434/PWR power analyzer is the ideal tool for finding energy waste in commercial and factory buildings and equipment. Electricians, field service engineers and maintenance technicians can use this special edition instrument to conduct energy consumption studies and electrical load analysis, and to perform power quality logging and analysis according to EN 50160. Fluke’s 434/PWR is a complete three-phase troubleshooting tool that measures virtually every power system parameter: voltage, current, frequency, power, energy consumption, cos f or power factor, unbalance, and harmonics and inter-harmonics. The Fluke 434/PWR is an upgraded version of the popular 434 model. It now includes the previously optional logging feature, Inrush and Transients measurement functions. In addition, it includes four iFlex 430, flexible current probes and a new soft case. The bundled PowerLog software enables logged files to be downloaded and reports generated automatically (the standard voltage leads and clips are included).Load studies and energy assessments
- Monitor maximum power demand over user-defined averaging periods
- Demonstrate the benefit of efficiency improvements with energy consumption tests
- Measure harmonic distortion caused by electronic loads
- Analyze reliability problems by capturing voltage dips and swells from load switching
Applications
- Load studies – verify electrical system capacity before adding loads
- Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
- Frontline troubleshooting – quickly diagnose problems on‐screen to get your operation back online
- Quality of service compliance – validate incoming power quality at the service entrance
- Long‐term analysis – uncover hard‐to‐find or intermittent issues
- Analyze reliability problems by capturing voltage dips and swells from load switching
- i430-Flexipack 4 current clamps
- 5 Test leads, 4 black, 1 green
- 5 Alligator clips, 4 black, 1 green
- BC430 Battery charger eliminator
- Power Log Software
- OC4USB Optical cable for USB
- WC100 Color localization set
- Getting Started (booklet)
- User Manual (CD-ROM)
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 435 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues. The Fluke 435 offers unique features like AutoTrend, which records everything on the screen automatically; System-Monitor, a quick diagnosis of system performance against user defined limits; Logger Function with multi-parameter logging; and Mains Signaling, measures interference from ripple control signals at specific frequencies. These features help to quickly diagnose problems and build benchmarks for predictive maintenance. The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality. Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 435 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes. Full measurement capability and the highest safety rating Fully Class A Compliant – conduct tests according to the stringent international IEC 61000-4-30 Class A standard. With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 435 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells. Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (16 MB) memory stores up to 50 screens. A detailed, user-configurable long-time recording gives you the MIN, MAX and AVG readings of up to 100 parameters on all 4 phases with selectable averaging time down to 0.5 seconds. Enough memory is available to record 400 parameters with 1 minute resolution for up to a month, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports. If any of these situations apply to you, then this tool is for you:- Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online
- Predictive Maintenance – Detect and prevent power quality issues before they cause downtime
- Quality of Service Compliance – Validate incoming power quality at the service entrance
- Long-term Analysis – Uncover hard-to-find or intermittent issues
- Load Studies – Verify electrical system capacity before adding loads
- Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving device
- Fluke C435 Water-tight hard case with rollers
- Fluke i430s 4x 3000A flexible current clamps, CAT IV 600 V rated
- Fluke TLS430 5 Test leads, 4 black, 1 green
- Fluke BC430 Battery Charger Eliminator
- FlukeView Software SW43W
- Fluke PowerLog Software
- Fluke OC4USB Optical Cable for USB
- Fluke WC100 Color localization set
- Getting Started printed
- User Manual (CD-ROM)
-
Feel free to contact us: Mobile: 0344 3813810
Call Us Today! (+92 307-7381381, +92 321-1818381) | buysolarpakistan@gmail.com
