Power Tools Archives - Page 3 of 6

Fluke 192C/S Color ScopeMeter with Software

Rs.0
Feel free to contact us: Mobile: 0344 3813810
Whether you are performing routine maintenance and calibration, or troubleshooting the hardest to solve problems like intermittent failures or sources of unwanted noise, the Fluke 192C Color Scopemeter has all the tools needed to get the job done. With 60 MHz bandwidth, up to 0.5 GS/s real-time sampling rate, 27,500 points memory for high resolution waveform per input they’re ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery powered instrument. This model has a high resolution color display that has a fast update rate, waveform pass/fail testing and a digital persistence mode – making the analysis of complex and dynamic signals that much easier.

Dual-input – 60 MHz bandwidth

Up to 0.5 GS/s real-time sampling per input

High waveform resolution of 3,000 datapoints per channel

Connect-and-View™ automatic triggering and a full range of manual trigger modes

Fast display update rate for seeing dynamic behavior instantaneously

Automatic capture and replay of 100 screens

27,500 points per input record length using ScopeRecord™ mode

TrendPlot™ paperless chart recorder for trend analysis up to 22 days

Up to 1000 V independently floating isolated inputs

Waveform reference for visual comparisons and automatic pass/fail testing of waveforms

Vpwm function for motor drive and frequency inverter applications.

1000 V CAT II and 600 V CAT III safety certified

Four hours rechargeable Ni-MH battery pack

See the Fluke 192C Color ScopeMeter For advanced capabilities see the Fluke 199C Color ScopeMeter Other models are the Fluke 196C. What’s Included:

Fluke BC190 Battery Charger/Line Voltage adapter

Fluke BP190 NiMH Battery Pack

Getting started booklet

User manual (CD-ROM)

Fluke TL75 Hard Point Test Lead Set

Fluke VPS200-G Voltage Probe (200 MHz, 10:1), Grey

Fluke VPS200-R Voltage Probe (200 MHz, 10:1), Red

Also comes with the SCC190 kit which includes:

Fluke C190 Hard Carrying Case;

Fluke OC4USB Optically isolated USB-Cable;

Fluke SW90W/034EFG FlukeView ® Software for Windows. English, French and German language
Add to cart Details Quick View
Fluke 43B Single Phase Power Quality Analyzer Kit

Rs.0
Feel free to contact us: Mobile: 0344 3813810 Power quality analysis plus a scope and a meter!! The Fluke 43B is a single phase power quality analyzer which combines the most useful capabilities of a power quality analyzer, multimeter and scope. It measures power harmonics, captures voltage sags, transients and inrush current. The Fluke 43B’s monitoring functions help track intermittent problems and power system performance. The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. Features include:

New! NiMH Battery provides extended operating time of 6.5 hours

Combines the most useful capabilities of a power quality analyzer, multimeter and scope

Simulates 3-phase power (assuming balanced loads) from a single-phase measurement

Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current

Monitoring functions help track intermittent problems and power system performance

Menus use familiar electrical terminology

New! Toggle through the most commonly used power quality modes with a single keystroke

Records two selectable parameters for up to 16 days

New! 20 measurement memories to save/recall screens and data with cursor readings

FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic

Measures resistance, diode voltage drop, continuity, and capacitance

Users / applications manual and power quality video to help answer tough questions

Complete package with voltage probes and 500A current clamp, FlukeView Software and optically isolated interface cable

3 year warranty on the Fluke 43B, 1 year on accessories

What’s Included:

C120 Hard Case

TP1 Flat-tipped Slim-Reach™ Test Probes

TP4 4 mm Round Slim-Reach™ Test Probes

i400s AC Current Clamp

OC4USB Optically Isolated USB Interface Adapter

BP120MH Rechargeable NiMH Battery Pack (installed)

PM 8907 Line Voltage Adapter/Battery Charger

SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM

Shielded Banana-to-BNC Adapter

Users Manual / Application Guide

Power Quality CD-ROM
Add to cart Details Quick View
Fluke 345 Power Quality Clamp Meter

Rs.0
Feel free to contact us: Mobile: 0344 3813810 he Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads. The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics. With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms. The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads. Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems. Applications:

Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters

Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment

Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs

Load studies – Verify electrical system capacity before adding loads

What’s Included:

345 Power Quality Clamp Meter

Soft carrying case

Power Log software

Test leads

Alligator clips

Test probes

USB cable

International ac adapter / battery eliminator

Printed English language user manual

Multi-language manual CD
Add to cart Details Quick View
Fluke 1735 Three Phase Power Logger

Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging. The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more. With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues. Set up the 1735 in seconds, with the included flexible current probes and color display. The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application. The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button. Applications:

Load studies – verify electrical system capacity before adding loads

Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices

Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment

Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping

See the additional tabs above this content for features, specifications, virtual demos and other documents and list of what’s included with the Fluke 1735 three phaser power logger. What’s Included: • 4 flexible current probes (15 A/150 A/3000 A) • Power Log software • Voltage leads and clips • Color localization set • PC interface cable • International ac adapter (115/ 30 V, 50/60 Hz) • Printed English manual • Multi-language manual CD • Soft carry case
Add to cart Details Quick View
Fluke 43B Single Phase Power Quality Analyzer Kit

Rs.0
Feel free to contact us: Mobile: 0344 3813810
Power quality analysis plus a scope and a meter!! The Fluke 43B is a single phase power quality analyzer which combines the most useful capabilities of a power quality analyzer, multimeter and scope. It measures power harmonics, captures voltage sags, transients and inrush current. The Fluke 43B’s monitoring functions help track intermittent problems and power system performance. The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. Features include:

New! NiMH Battery provides extended operating time of 6.5 hours

Combines the most useful capabilities of a power quality analyzer, multimeter and scope

Simulates 3-phase power (assuming balanced loads) from a single-phase measurement

Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current

Monitoring functions help track intermittent problems and power system performance

Menus use familiar electrical terminology

New! Toggle through the most commonly used power quality modes with a single keystroke

Records two selectable parameters for up to 16 days

New! 20 measurement memories to save/recall screens and data with cursor readings

FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic

Measures resistance, diode voltage drop, continuity, and capacitance

Users / applications manual and power quality video to help answer tough questions

Complete package with voltage probes and 500A current clamp, FlukeView Software and optically isolated interface cable

3 year warranty on the Fluke 43B, 1 year on accessories

What’s Included:

C120 Hard Case

TP1 Flat-tipped Slim-Reach™ Test Probes

TP4 4 mm Round Slim-Reach™ Test Probes

i400s AC Current Clamp

OC4USB Optically Isolated USB Interface Adapter

BP120MH Rechargeable NiMH Battery Pack (installed)

PM 8907 Line Voltage Adapter/Battery Charger

SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM

Shielded Banana-to-BNC Adapter

Users Manual / Application Guide

Power Quality CD-ROM
Add to cart Details Quick View
Fluke 345 Power Quality Clamp Meter

Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads. The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics. With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms. The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads. Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems. Applications:

Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters

Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment

Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs

Load studies – Verify electrical system capacity before adding loads

What’s Included:

345 Power Quality Clamp Meter

Soft carrying case

Power Log software

Test leads

Alligator clips

Test probes

USB cable

International ac adapter / battery eliminator

Printed English language user manual

Multi-language manual CD
Add to cart Details Quick View
Fluke 434 Three Phase Power Quality Analyzer Kit (Series 1)

Rs.0
Feel free to contact us: Mobile: 0344 3813810 Pinpoint power problems faster, safer and in greater detail! The Fluke 434 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues. The Fluke 434 offers unique features like AutoTrend, which records everything on the screen automatically, and System-Monitor, a quick diagnosis of system performance against user defined limits and Logger Function (optional functionality can be added with upgrade kit Fluke 434/LOG). Together the features help to quickly diagnose problems and build benchmarks for predictive maintenance. The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality. Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 434 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes. Full measurement capability and the highest safety rating With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 434 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells. Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (8 MB) memory stores up to 50 screens and up to 10 measurements each comprising 32 parameters – including setups and trend data – recorded for more than a year, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports. If any of these situations apply to you, then this tool is for you:

Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online

Predictive Maintenance – Detect and prevent power quality issues before they cause downtime

Quality of Service Compliance – Validate incoming power quality at the service entrance

Long-term Analysis – Uncover hard-to-find or intermittent issues

Load Studies – Verify electrical system capacity before adding loads

Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving devices

For greater value and capabilities see also the Fluke 435 What’s Included:

Fluke C430 Hard carrying case

Fluke i400s 4 current clamps, CAT IV 600 V

Fluke TLS430 5 Test leads, 4 black, 1 green

Fluke BC430 Battery Charger Eliminator

FlukeView Software SW43W

Fluke OC4USB Optical Cable for USB

Fluke WC100 Color localization set

Getting Started printed

User Manual (CD-ROM)
Add to cart Details Quick View
Fluke 435 Three Phase Power Quality Analyzer Kit (Series 1)

Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 435 three-phase power quality analyzer help you locate, predict, prevent and troubleshoot problems in three- and single- phase power distribution systems. Troubleshooting is faster with on-screen display of trends and captured events, even while background recording continues. The Fluke 435 offers unique features like AutoTrend, which records everything on the screen automatically; System-Monitor, a quick diagnosis of system performance against user defined limits; Logger Function with multi-parameter logging; and Mains Signaling, measures interference from ripple control signals at specific frequencies. These features help to quickly diagnose problems and build benchmarks for predictive maintenance. The new IEC standards for flicker, harmonics, and power quality are built right in to take the guess work out of power quality. Simple to use with immediate results Designed for power quality specialists as well as electricians and plant technicians working in industrial, healthcare, business, and public services settings, the Fluke 435 has functions typically only found on expensive power recorders. Yet its menu-driven interface allows users to be hooked up and recording in minutes. Full measurement capability and the highest safety rating Fully Class A Compliant – conduct tests according to the stringent international IEC 61000-4-30 Class A standard. With a CAT III, 1000 V / CAT IV, 600 V safety rating the Fluke 435 can measure all phases, neutral and ground on virtually every connection in a low voltage electrical distribution system. The meter’s measurement capabilities encompass all power system parameters including true-rms voltage and current, frequency, power, power consumption (energy), unbalance and flicker. They also automatically capture events like transients (as fast as 5 microseconds and as high as 6kV), interruptions, rapid voltage changes and dips and swells. Rugged design for field use Optimized for mobile applications, these rugged instruments operate up to seven hours on a single battery charge. The large data (16 MB) memory stores up to 50 screens. A detailed, user-configurable long-time recording gives you the MIN, MAX and AVG readings of up to 100 parameters on all 4 phases with selectable averaging time down to 0.5 seconds. Enough memory is available to record 400 parameters with 1 minute resolution for up to a month, all of which can be transferred to a PC via FlukeView® software for analysis or use in reports. If any of these situations apply to you, then this tool is for you:

Frontline Troubleshooting – Quickly diagnose problems on-screen to get your operation back online

Predictive Maintenance – Detect and prevent power quality issues before they cause downtime

Quality of Service Compliance – Validate incoming power quality at the service entrance

Long-term Analysis – Uncover hard-to-find or intermittent issues

Load Studies – Verify electrical system capacity before adding loads

Energy Assessments – Quantify energy consumption before and after improvements to justify energy saving device

What’s Included:

Fluke C435 Water-tight hard case with rollers

Fluke i430s 4x 3000A flexible current clamps, CAT IV 600 V rated

Fluke TLS430 5 Test leads, 4 black, 1 green

Fluke BC430 Battery Charger Eliminator

FlukeView Software SW43W

Fluke PowerLog Software

Fluke OC4USB Optical Cable for USB

Fluke WC100 Color localization set

Getting Started printed

User Manual (CD-ROM)
Add to cart Details Quick View
Fluke 1735 Three Phase Power Logger

Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging. The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more. With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues. Set up the 1735 in seconds, with the included flexible current probes and color display. The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application. The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button. Applications:

Load studies – verify electrical system capacity before adding loads

Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices

Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment

Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping

See the additional tabs above this content for features, specifications, virtual demos and other documents and list of what’s included with the Fluke 1735 three phaser power logger. What’s Included: • 4 flexible current probes (15 A/150 A/3000 A) • Power Log software • Voltage leads and clips • Color localization set • PC interface cable • International ac adapter (115/ 30 V, 50/60 Hz) • Printed English manual • Multi-language manual CD • Soft carry case
Add to cart Details Quick View
Fluke 1743 Three Phase Power Quality Logger Memobox
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues. The Fluke 1743 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:

V, A, W, VA, VAR

Power Factor

Energy

Flicker

Voltage

THD

Apart from the Fluke 1743, the Fluke 1740 series includes two other power quality loggers: Fluke 1744 & Fluke 1745.

The Fluke 1744 includes the same features as the Fluke 1743 but can measure voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.

The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.

The main difference between the 1743 and the other 2 models in the series, is the 1743 does not measure harmonics, unbalance or mains signaling. If you need to require these measurements, we recommend looking at the higher models. Software: The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard. Applications:

Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance

Quality of service compliance – Validate incoming power quality at the service entrance

Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation

Load studies – Verify electrical system capacity before adding loads

Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements

What’s Included:

4 Flexible probes 15/150/1500/3000 A with 2 m cable

CD-ROM with PQ Log software

RS232 interface cable and RS232-USB adapter

Test leads for voltages and power supply

4 black dolphin clips

Color localization kit

Carrying bag

Test certificate with measurement values

Printed English manual

Multi-language manual CD
Details Quick View
Fluke 1744 Three Phase Power Quality Logger Memobox
Feel free to contact us: Mobile: 0344 3813810
The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues. The Fluke 1744 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:

V, A, W, VA, VAR

Power Factor

Energy

Flicker

Voltage

THD

Harmonics, Interharmonics

Mains Signaling

Unbalance

Frequency

Apart from the Fluke 1744, the Fluke 1740 series includes two other power quality loggers: Fluke 1743 & Fluke 1745.

The Fluke 1743 includes the same features as the Fluke 1743 but is not capable of measuring voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.

The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.

The main difference between the 1744 and the other 2 models in the series, is the 1744 measure harmonics, unbalance or mains signaling but doesn’t have an LCD display and only has a 3 hour UPS. The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard. Applications:

Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance

Quality of service compliance – Validate incoming power quality at the service entrance

Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation

Load studies – Verify electrical system capacity before adding loads

Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements

What’s Included:

4 Flexible probes 15/150/1500/3000 A with 2 m cable

CD-ROM with PQ Log software

RS232 interface cable and RS232-USB adapter

Test leads for voltages and power supply

4 black dolphin clips

Color localization kit

Carrying bag

Test certificate with measurement values

Printed English manual

Multi-language manual CD
Details Quick View
Fluke 1745 Three Phase Power Quality Logger Memobox

Rs.0
Feel free to contact us: Mobile: 0344 3813810
The Fluke 1745 Three Phase Power Quality Logger is an advanced IP50 power quality logger with real-time LCD and five hours UPS for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, this allows you to analyze power quality in detail and to correlate intermittent events, helping to identify the root cause of disturbances. The included PQ Log software quickly assesses the quality of power at the service entrance, substation, or at the load, according to the latest EN50160 standard. The Fluke 1745 Three Phase Power Quality Logger can not only measure the common power parameters but it also measures voltage and current harmonics, interharmonics, mains signaling, unbalance, and frequency. Apart from the Fluke 1745, the Fluke 1740 series includes two other power quality loggers: Fluke 1743 & Fluke 1743.

The Fluke 1743 is capable of measuring most common power parameters but cannot measure voltage and current harmonics, interharmonics, mains signaling, unbalance or frequency.

The Fluke 1744 is more similar to the 1743 and is a better solution if you need to measure what the 1743 is incapable of measuring.

Applications:

Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance

Quality of service compliance – Validate incoming power quality at the service entrance

Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation

Load studies – Verify electrical system capacity before adding loads

Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements

What’s Included:

4 Flexible probes 15/150/1500/3000 A with 2 m cable

CD-ROM with PQ Log software

RS232 interface cable and RS232-USB adapter

Test leads for voltages and power supply

4 black dolphin clips

Color localization kit

Carrying bag

Test certificate with measurement values

Printed English manual

Multi-language manual CD
Add to cart Details Quick View
Fluke 1750 Three-Phase Power Quality Recorder
Feel free to contact us: Mobile: 0344 3813810 Record three-phase power quality and monitor for power quality disturbances with the new Fluke 1750 Three Phase Power Recorder and the Fluke Power Analyzer software. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Never miss capturing a disturbance – with the exclusive threshold-free measurement system, it’s automatic. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Three Phase Power Recorder. Unprecedented accuracy and resolution provide complete visibility into your distribution system. The recorder automatically detects, scales, and powers current probes without needing batteries. Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range – no more uncertainty that data is being recorded. The Fluke 1750 Three Phase Power Quality Recorder has an exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment. The PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. The built-in wireless technology allows you to control multiple instruments from a distance easily, without the need for a laptop computer (laptops can also be used when desired). Applications: Long-term analysis: Uncover hard-to-find or intermittent issues Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports Quality of service compliance: Validate incoming power quality at the service entrance Semi-permanent monitoring: Monitor critical equipment, capturing power quality events to correlate with equipment malfunctions What’s Included:

1750 aquisition unit

PDA wireless “front panel interface” and charger power plug adapters

4 – 400A current probes (3140)

5 Test leads and clips

SD memory card

Fluke Power View and Fluke Power Analyze software

Power cord with international plug set

Ethernet cable

Color localization set

Printed Getting Started manual

Product CD with software and user manual PDF
Details Quick View
Fluke 434/PWR Three Phase Power Quality Analyzer

Rs.0
Feel free to contact us: Mobile: 0344 3813810 The Fluke 434/PWR power analyzer is the ideal tool for finding energy waste in commercial and factory buildings and equipment. Electricians, field service engineers and maintenance technicians can use this special edition instrument to conduct energy consumption studies and electrical load analysis, and to perform power quality logging and analysis according to EN 50160. Fluke’s 434/PWR is a complete three-phase troubleshooting tool that measures virtually every power system parameter: voltage, current, frequency, power, energy consumption, cos f or power factor, unbalance, and harmonics and inter-harmonics. The Fluke 434/PWR is an upgraded version of the popular 434 model. It now includes the previously optional logging feature, Inrush and Transients measurement functions. In addition, it includes four iFlex 430, flexible current probes and a new soft case. The bundled PowerLog software enables logged files to be downloaded and reports generated automatically (the standard voltage leads and clips are included).
Load studies and energy assessments

Monitor maximum power demand over user-defined averaging periods

Demonstrate the benefit of efficiency improvements with energy consumption tests

Measure harmonic distortion caused by electronic loads

Analyze reliability problems by capturing voltage dips and swells from load switching

Applications

Load studies – verify electrical system capacity before adding loads

Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices

Frontline troubleshooting – quickly diagnose problems on‐screen to get your operation back online

Quality of service compliance – validate incoming power quality at the service entrance

Long‐term analysis – uncover hard‐to‐find or intermittent issues

Analyze reliability problems by capturing voltage dips and swells from load switching

What’s Included:

i430-Flexipack 4 current clamps

5 Test leads, 4 black, 1 green

5 Alligator clips, 4 black, 1 green

BC430 Battery charger eliminator

Power Log Software

OC4USB Optical cable for USB

WC100 Color localization set

Getting Started (booklet)

User Manual (CD-ROM)
Add to cart Details Quick View
Fluke 179 True RMS Digital Multimeter

Rs.0
Feel free to contact us: Mobile: 0344 3813810
Versatile meter for maintenance, field service and bench repair. The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record. The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display with backlight that’s easier to view. Check the features and specifications using the tabs above. Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. For even greater value, the Fluke 179 is also available in the following kits: Fluke 179/EDA2 Electronics Multimeter and Deluxe Accessory Combo Kit or Fluke 179/1AC-II Electrician’s Multimeter and Voltage Tester Combo Kit or Fluke 179/61 Industrial Multimeter and Infrared Thermometer Combo Kit or Fluke 179/TPAK Digital Multimeter & ToolPak Combo Kit or Fluke 179/IMSK Digital Multimeter & Clamp Meter Combo Kit Also available with no temperature as Fluke 177 or as Fluke 175 What’s Included:

Fluke 80BK Temperature Probe

Fluke TL75 Test Leads

Installed 9V battery

Users manual
Add to cart Details Quick View
Fluke 175 True RMS Multimeter

Rs.0

Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair. The Fluke 175 True-rms digital multimeter has the features needed to find most electrical, electronic, electro-mechanical and heating and ventilation problems. Simple to use with significant improvements like True-rms, frequency, capacitance and min-max record. Check the features and specifications using the tabs above. Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. Want better accuracy and a backlight see the Fluke 177 Also available with temperature as Fluke 179

Add to cart Details Quick View

Load studies and energy assessments

Applications

Title