• Feel free to contact us: Mobile: 0344 3813810
    Versatile digital multimeter for maintenance, field service and bench repair. The NEW Fluke 77-IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements with more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. The Fluke Model 77-IV is a battery-powered, average responding-rms indicating multimeter, with a 6000-count, 3 3/4-digit display, and a bar graph. Measures:
    • AC / DC voltage & current
    • Wide 1000 V measurement range
    • Average responding AC measurements
    • 0.3% accuracy
    • 10 Amps continuous (20A for 30 seconds)
    • Frequency and capacitance
    • Resistance and continuity
    • Diodes
    This multimeter meets the CAT III and CAT IV IEC 61010 standards. Look at the Fluke 73-III Digital Mulitimeter or the waterproof design Fluke 27-YEL Analog/Digital Multimeter What’s Included:
    • Fluke TL75 test leads
    • 9 V battery (installed)
    • Manual
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. Features for maximum productivity
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    • Large digit display with bright, two-level backlight
    Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. For a greater value see the Fluke 87V/E2 – Industrial Electrician’s Combo Kit or the Fluke 87V/AEK – Advanced Electronic Kit or the Fluke 87V/IMSK – 87V with i400 Clamp Meter Combo Kit Also available in an average responding multimeter, Fluke 83V What’s Included:
    • Fluke TL75 test leads
    • Fluke AC72 Alligator Clips
    • Holster
    • 9V battery (installed)
    • Getting Started Manual
    • CD with detailed manual
    • Fluke 80BK temperature probe
  • Feel free to contact us: Mobile: 0344 3813810 True-rms Basic Multimeter designed for basic electrical testsThe Fluke 113 Basic Multimeter gives utility users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 Basic Multimeter has significant improvements over Fluke’s original 7-600, and other utility multimeters. Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Fluke 113 Basic Multimeter can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this new meter is a must have for the utility users toolbox. What’s Included:
    • Fluke TL75 test leads
    • Holster
    • Users manual
    • and 9 V battery (installed).
  • Feel free to contact us: Mobile: 0344 3813810 Designed by electricians. Engineered by Fluke. Compact true-rms meter for electrical troubleshooting.  The Fluke 114 is a battery-powered, true-rms multimeter the perfect troubleshooting tool for “go/no-go” testing.  It includes a feature to prevent false readings caused by ghost voltage. Also check out the Fluke 115 Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage. What’s Included:
    • Holster
    • Installed 9 V battery
    • Test leads
    • User manual
  • Feel free to contact us: Mobile: 0344 3813810 Designed by electricians. Engineered by Fluke. Compact true-rms meter for field service technicians. The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications. Also check out the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage.
  • Feel free to contact us: Mobile: 0344 3813810
    Designed by electricians. Engineered by Fluke. The Fluke 116 HVAC Multimeter features temperature and microamps measurements useful for heating, ventilation, air conditioning and refrigeration (HVAC/R) technicians.  The Fluke 116 is a compact true-rms meter and has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors. The Fluke 116 also, has dual impedance capability: incorporating both regular high impedance test capabilities and low impedance functions for detecting ghost voltages, just switch to the Auto-V/LoZ (low impedance) test setting to whether measurement is a ghost voltage.
    • Auto-V stands for automatic volts. This feature automatically determines whether the measured signal is ac voltage or dc voltage, selects the correct function and range, and displays the correct information.
    • LoZ stands for Low Impedance (Z). This feature presents a low impedance input to the circuit under test. This reduces the possibility of false readings due to ghost voltages and improves accuracy when testing to determine absence or presence of voltage.
    Also check out the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter, and the Fluke 117, the Electrician’s Multimeter with Non-contact voltage. What’s Included:
    • 4 mm silicone test lead set
    • 80BK Integrated Temperature probe
    • Holster
    • Installed 9 V battery
    • User manual
  • Feel free to contact us: Mobile: 0344 3813810
    Designed by electricians. Engineered by Fluke. Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster. The Fluke 117 has dual impedance capability: incorporating both regular high impedance test capabilities and low impedance functions for detecting ghost voltages, just switch to the Auto-V/LoZ (low impedance) test setting to whether measurement is a ghost voltage.
    • Auto-V stands for automatic volts. This feature automatically determines whether the measured signal is ac voltage or dc voltage, selects the correct function and range, and displays the correct information.
    • LoZ stands for Low Impedance (Z). This feature presents a low impedance input to the circuit under test. This reduces the possibility of false readings due to ghost voltages and improves accuracy when testing to determine absence or presence of voltage.
    The Fluke 117 also includes the built-in VoltAlert non-contact voltage function.  Located on the top of the meter above the LCD display, it’s another feature handy for detecting the invisible. The VoltAlert function detects the presence of ac voltage, sounds an audible tone and activates a red LED indicator light on the top center of the LCD display.  Using this feature before making a contact measurement can add an extra layer of safety. Also check out the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter, and the Fluke 116 HVAC Multimeter with Temperature and Microamps. What’s Included:
    • 4 mm silicone test lead set
    • Holster
    • User manual
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened. Its’ unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend. The Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture packs more accuracy and convenience into a handheld multimeter than ever before, putting more problem solving power in your hands. It is the ultimate handheld tool for demanding applications that require high-precision APPLICATIONS:
    • Develop, install, or maintain electronic devices
    • Precision testing of surface mount and high density circuits
    • Customers who need to log and record results to solve intermittent problems
    • Communication; wireless, wired, LAN, broadband, CATV, audio/video
    • Industrial / Electrical equipment
    • Instrumentation (example: test and medical equipment)
    • Consumer electronics
    • Automotive
    • Education
    • Security
    What’s Included:
    • Manual
    • 6 AA Batteries, installed
    • TL71 Silicone Test Leads
    • Probe Holder
    • Two AC72 Alligator Clips
    Supplemental Material:
    • Registration Card
    • Cal Practices Document
    • CD-ROM Users’ Manual (16 languages)
    • Getting Started Manual
    • Calibration Certification Sheet
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 787 Process Meter was the first tool to combine a loop calibrator with a fully-functional 1000V True RMS digital multimeter to give process technicians double the power in one tool. A maintenance and calibration tool that will be at home in every instrumentation technician’s tool box, the Fluke 787 Process Meter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the Fluke 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you’re tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power – the Fluke 787 ProcessMeter. Also see the Fluke 789 ProcessMeter What’s Included:
    • Alligator Clips
    • Protective Yellow Holster with test lead storage
    • One 9V alkaline battery
    • Fluke TL75 Safety-Designed Test lead Set
    • Product over and Users Manual (CD-ROM) in 14 languages
  • Feel free to contact us: Mobile: 0344 3813810 Two powerful tools in one The Fluke 1577 Insulation Multimeter combine a digital 1 kV insulation tester with a full-featured, true-rms digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance. Whether you work on motors, generators, cables, or switch gear, the Fluke 1577 Insulation Multimeter is ideally suited to help you with your tasks. For a greater capabilities purchase the Fluke 1587 Insulation Multimeter What’s Included:
    • Remote probe
    • Test leads
    • Alligator clips
    • Hard case
    • User documentation
  • Feel free to contact us: Mobile: 0344 3813810 The NEW Fluke 233 True-rms Remote Display Digital Multimeter gives you ultimate flexibility in unusual measurement scenarios. Place the removable display where you can see it and then put the meter where it is convenient for you—no more juggling of leads and the meter while stretching into a tight spot. You can now take measurements in hard-to-reach places, where machines or panels are physically separated from a limit or isolator switch, or in user prohibited areas such as clean rooms or hazardous areas. Imagine the possibilities! What would you do if you could be in two places at once?
    • True-rms ac voltage and current for accurate measurements on non-linear signals
    • Measure up to 1000 V ac and dc
    • Measure up to 10 A (20 A for 30 seconds)
    • 10,000 μF capacitance range
    • Frequency to 50 kHz
    • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    • Resistance, continuity and diode test
    • Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
    • The removable magnetic display can be conveniently mounted where it is easily seen
    • Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
    • Use as a conventional multimeter when the display is connected
    • Radio transmitter automatically turns off when the display is connected to the meter
    • Auto power off maximizes battery life
    • Min/Max and Average recording to capture variations automatically
    • Test continuity and diodes
    • Easy to read display with large digits and bright backlight
    • Battery life approximately 400 hours
  • Feel free to contact us: Mobile: 0344 3813810 Versatile multimeter for manufacturing, development and service applications
    • 5.5 digit resolution
    • Basic V dc accuracy of 0.01 %
    • Dual display
    • Dedicated dc leakage current measurement
    • 2×4 ohms 4-wire measurement technique
    • Six dedicated buttons for fast access to instrument setups
    • Hi/Lo limit compare for Pass/Fail testing
    The Fluke 8808A multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.01 %. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do. Six setup buttons on the Fluke 8808A front panel operate like a car radio’s station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It’s that easy! The setup buttons eliminate the need to follow complex work instruction sheets. Operators no longer need to press multiple buttons to set up a measurement function and range, test limits, or enter other parameters to make a measurement. What’s Included:
    • Meter
    • TL71 test leads
    • Line cord
    • Spare line fuse
    • Statement of cal practices
    • WEEE information sheet
    • Warranty statement
    • Getting Started guide (English, French, German, Spanish, Italian, Simplified Chinese, Japanese)
    • CD Rom with user manual (English)
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 8845A Bench Top 6.5 digit Precision Multimeter has the precision and versatility to handle your most demanding measurements, on the bench or in a system. These meters are both high performance and feature rich, yet also remarkably easy to use. The Fluke 8845A Bench Top 6.5 digit Precision Multimeter performs the functions you would expect to see in a multifunction DMM, including measuring volts, ohms, and amps. Basic V dc accuracy of up to 0.0024 %, 10 A current range, and a wide ohms range give you an unbeatable combination of measurement capability. You can also use the the Fluke 8845A Bench Top 6.5 digit Precision Multimeter to measure frequency and period.  The functions of a counter, capacitance meter, and thermometer are built in for unparalleled versatility. Extend the meters’ utility even more with their graphical display modes, including Trendplot paperless recorder mode, statistics and histograms—features you won’t find on other multimeters. Of course, the meter is also durable and dependable, features you expect from any Fluke meter. This unique combination of features and performance makes the Fluke 8845A Bench Top 6.5 digit Precision Multimeter an unbeatable value for a wide variety of applications, including manufacturing test, research and development, and service. What’s Included:
    • TL71 Test Lead Set, Premium DMM
    • LCI Line Core
    • Spare Line Power Fuse
    • Statement of Calibration Practices
    • WEEE Information Sheet
    • Warranty Information
    • Programmer, Users and Service Manuals (CD-ROM)
    • FlukeView Forms – Basic for 8845/8846
  • Feel free to contact us: Mobile: 0344 3813810 The new standard for rugged Fluke 27 II and Fluke 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.
    • Measure up to 1000 V ac and dc
    • Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
    • Frequency to 200 kHz
    • Extended ac voltage bandwidth – 40 Hz to 30 kHz
    • Resistance, continuity and diode test
    • Min/Max and average recording to capture variations automatically
    • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
    • Designed to withstand 3 meter drop (with holster)
    • Average responding voltage and current for measurements (Fluke 28-II is TRMS)
    • Backlit keypad buttons allow for easy visibility in lowlit areas
    • Large display digits and 2 level bright white backlight for increased visibility
    • Reversible holster for added protection when not in use
    • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
    • Long battery life (800 hours)
    • Relative mode to remove test lead resistance from low ohms measurements
    • Auto and manual ranging for maximum flexibility
    • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
    • MSHA approval (pending)
    Note: for a TRMS version of this Fluke 27-II that also includes built-in temperature measurement and a unique Low Pass filter for measuring accurate readings when working on variable speed drives (VFDs/VSDs) see the Fluke 28-II industrial multimeter.
  • Feel free to contact us: Mobile: 0344 3813810 The Fluke 28-II multimeter is the new standard for rugged Fluke 28 II digital multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Fluke 28-II has an IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. This meter is built to work in the toughest environments.
    • Measure up to 1000 V ac and dc
    • Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
    • Frequency to 200 kHz
    • Extended ac voltage bandwidth – 40 Hz to 30 kHz
    • Resistance, continuity and diode test
    • Min/Max and average recording to capture variations automatically
    • Peak min-max
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
    • Designed to withstand 3 meter drop (with holster)
    • True-rms ac voltage and current for accurate measurements on non-linear loads
    • Hi resolution 20,000 count display mode
    • Backlit keypad buttons allow for easy visibility in lowlit areas
    • Large display digits and 2 level bright white backlight for increased visibility
    • Reversible holster for added protection when not in use
    • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
    • Long battery life (800 hours)
    • Relative mode to remove test lead resistance from low ohms measurements
    • Auto and manual ranging for maximum flexibility
    • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
    • MSHA approval (pending)
  • Feel free to contact us: Mobile: 0344 3813810
    The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. Features for maximum productivity
    • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
    • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
    • Large digit display with bright, two-level backlight
    Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. For a greater value see the Fluke 87V/E2 – Industrial Electrician’s Combo Kit or the Fluke 87V/AEK – Advanced Electronic Kit or the Fluke 87V/IMSK – 87V with i400 Clamp Meter Combo Kit Also available in an average responding multimeter, Fluke 83V What’s Included:
    • Fluke TL75 test leads
    • Fluke AC72 Alligator Clips
    • Holster
    • 9V battery (installed)
    • Getting Started Manual
    • CD with detailed manual
    • Fluke 80BK temperature probe
Go to Top