Solar Products - buysolar.pk

Crown RICCO RI 1.2KVA Inverter (12V)

Rated 4.00 out of 5

Crown Micro Ricco RIS 1.2kva – 720w Hybrid Solar Inverter With AC Charger & AVR:

Specification

Power: 720 Watts (1200VA/12Vdc)

Capacity: 5 tube lights or 10 energy savers and 3 fans

Crown XBOLT XIS 1.2 KVA (12V)

Rated 4.00 out of 5

Power:

920 Watts (1200VA/12Vdc)

Capacity

5 tube lights or 10 energy savers and 4 fans

EP Solar Tracer 1210RN 10A MPPT

EP Solar Tracer Series MPPT

Tracer series controller adopts latest MPPT technology (Maximum Power Point Tracking) and advanced tracking algorithm to make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increases the charge efficiency upto 30% and potentially decrease the power of solar array needed. The ability to step-down the higher voltage solar module to recharge a lower voltage battery bank greatly increases system design flexibility. The cable size can be reduced because of the small current from the solar array.

Product features:

+ MPPT technology + Peak conversion efficiency of 97% + High Tracking efficiency of 99% + Several seconds tracking speed + 4-Stage charge with PWM output + Nature convection cooling + Full power output in ambient temperature up to 45 ℃ + Temperature compensation + Sealed, Gel and Flooded battery option + Widely used, automatically recognize day/night + Diversified load control + RJ45 interface &optional meter + 1 year warranty + CE certificate

Feel free to contact us: Mobile: 0344 3813810

EP Solar Tracer 2210RN 20A MPPT

EP Solar Tracer Series MPPT

Tracer series controller adopts latest MPPT technology (Maximum Power Point Tracking) and advanced tracking algorithm to make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increases the charge efficiency upto 30% and potentially decrease the power of solar array needed. The ability to step-down the higher voltage solar module to recharge a lower voltage battery bank greatly increases system design flexibility. The cable size can be reduced because of the small current from the solar array.

Product features:

+ MPPT technology + Peak conversion efficiency of 97% + High Tracking efficiency of 99% + Several seconds tracking speed + 4-Stage charge with PWM output + Nature convection cooling + Full power output in ambient temperature up to 45 ℃ + Temperature compensation + Sealed, Gel and Flooded battery option + Widely used, automatically recognize day/night + Diversified load control + RJ45 interface &optional meter + 1 year warranty + CE certificate

Feel free to contact us: Mobile: 0344 3813810

EP Solar Tracer 3210RN 30A MPPT

EP Solar Tracer Series MPPT

Tracer series controller adopts latest MPPT technology (Maximum Power Point Tracking) and advanced tracking algorithm to make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increases the charge efficiency upto 30% and potentially decrease the power of solar array needed. The ability to step-down the higher voltage solar module to recharge a lower voltage battery bank greatly increases system design flexibility. The cable size can be reduced because of the small current from the solar array.

Product features:

+ MPPT technology + Peak conversion efficiency of 97% + High Tracking efficiency of 99% + Several seconds tracking speed + 4-Stage charge with PWM output + Nature convection cooling + Full power output in ambient temperature up to 45 ℃ + Temperature compensation + Sealed, Gel and Flooded battery option + Widely used, automatically recognize day/night + Diversified load control + RJ45 interface &optional meter + 1 year warranty + CE certificate

Feel free to contact us: Mobile: 0344 3813810

EP Solar Tracer 4210RN 40A MPPT

EP Solar Tracer Series MPPT

Tracer series controller adopts latest MPPT technology (Maximum Power Point Tracking) and advanced tracking algorithm to make the solar module operate at ideal voltage which the solar modules can produce the maximum available power. Compared to conventional PWM controller, MPPT technology increases the charge efficiency upto 30% and potentially decrease the power of solar array needed. The ability to step-down the higher voltage solar module to recharge a lower voltage battery bank greatly increases system design flexibility. The cable size can be reduced because of the small current from the solar array.

Product features:

+ MPPT technology + Peak conversion efficiency of 97% + High Tracking efficiency of 99% + Several seconds tracking speed + 4-Stage charge with PWM output + Nature convection cooling + Full power output in ambient temperature up to 45 ℃ + Temperature compensation + Sealed, Gel and Flooded battery option + Widely used, automatically recognize day/night + Diversified load control + RJ45 interface &optional meter + 1 year warranty + CE certificate

Feel free to contact us: Mobile:030 77 381 381

IVT German 20A MPPT

Rs.8,500

Feel free to contact us: Mobile:030 77 381 381

Morningstar’s TriStar MPPT 45A

Rs.65,000

Feel free to contact us: Mobile:030 77 381 381 Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers. The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging.

Morningstar’s TriStar MPPT 60A

Rs.68,000

Feel free to contact us: Mobile:030 77 381 381 Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers. The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging.

Fangpusun PWM 30A

Rs.13,500

Feel free to contact us: Mobile: 030 77 381 381

WellSee MPPT 30A 12/24V Charge Controller

WellSee Charge Controller

Maximum Power Point Tracking (MPPT in short) system is a system which allows PV panels to outputs more Power by adjusting working condition of the electrical module. In Figure1 A indicates that the ordinary controller, which makes PV battery work on 12V ,only outputs a power point of 53W (a general power point), B indicates that MPPT controller makes PV battery always work at the maximum power point, thus outputs the power point of 75W (the maximum power point). Product features:

Applicable to various types of batteries,
MPPT function
Temperature sensor battery charging compensation
Overload protection (automatic restoration)
Overcharge protection
Short circuit protection (automatic restoration),
Thunder protection
Reverse discharge protection
Reverse polarity connection protection (automatic restoration)
Under voltage protection

Feel free to contact us: Mobile:030 77 381 381

WellSee MPPT 20A 48V Charge Controller

WellSee Charge Controller

Maximum Power Point Tracking (MPPT in short) system is a system which allows PV panels to outputs more Power by adjusting working condition of the electrical module. In Figure1 A indicates that the ordinary controller, which makes PV battery work on 12V ,only outputs a power point of 53W (a general power point), B indicates that MPPT controller makes PV battery always work at the maximum power point, thus outputs the power point of 75W (the maximum power point). Product features:

Applicable to various types of batteries,
MPPT function
Temperature sensor battery charging compensation
Overload protection (automatic restoration)
Overcharge protection
Short circuit protection (automatic restoration),
Thunder protection
Reverse discharge protection
Reverse polarity connection protection (automatic restoration)
Under voltage protection

Feel free to contact us: Mobile: 030 77 381 381

Axpert KS 5KVA 48V Hybrid Inverter

AXPERT FEATURES:

- Sine-Wave Inverter. - Selectable input voltage range for home appliances and personal computers. - Adjustable battery charging current based on applications. - Configurable AC/Solar Charger priority via LCD setting. - Compatible to mains voltage or generator power. - Auto restart while AC is recovering. - Overload and short circuit protection. - Smart battery charger design for optimized battery performance. - Cold start function. Feel free to contact us: Mobile: 0344 3813810

Stecagrid 10000+ 3PH hybrid

Rs.420,000

Feel free to contact us: Mobile:030 77 381 381 High efficiency ∙ Wide input voltage range ∙ Three-phase, symmetrical grid feeding ∙ Integrated data logger ∙ Firmware update possible ∙ Integrated DC circuit breaker ∙ Robust metal casing ∙ Suitable for outdoor installation

Fluke 381 Remote Display True-RMS 1000 A AC/DC Clamp Meter with iFlex

Rs.0

Feel free to contact us: Mobile: 0344 3813810

Fluke 376 True-RMS 1000A AC/DC Clamp Meter with iFlex

Rs.0

Feel free to contact us: Mobile: 0344 3813810

True-RMS 1000A AC/DC
Work in tight spots with the 18" iFlex current probe and measure up to 2500A AC
CAT III/IV Safety ratings
3 years Warranty

The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:

CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF

What’s Included:

18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries

Fluke 375 True-RMS 600A AC/DC Clamp Meter

Rs.0

Feel free to contact us: Mobile: 0344 3813810

CAT IV 600
CAT III 1000 V
3 years Warranty

The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:

CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF

What’s Included:

18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries

Fluke 373 True-RMS 600 A AC Clamp Meter

Rs.0

Feel free to contact us: Mobile: 0344 3813810

True-RMS
600 A AC/DC
Works with iFlex flexible current probes
3 years Warranty

The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:

CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF

What’s Included:

18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries

Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter

Rs.0

Feel free to contact us: Mobile: 0344 3813810

Detachable Jaw clamp
Built in Flash/Torch light
3 years Warranty

The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:

CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF

What’s Included:

18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries

Fluke 902 True-rms HVAC Clamp Meter

Rs.0

Feel free to contact us: Mobile: 0344 3813810

CAT III Rating 600v
Low Pass Filter
3 years Warranty

The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes with the fixed jaw. The Fluke 376 is part of Fluke’s new Clamp Meter line that includes: 381, 375, 374, 373 & 365. Replacing the Fluke 337 The Fluke 376 clamp meter is the direct replacement for the Fluke 337 clamp meter. The Fluke 376 includes all the features of the 337, but also includes:

CAT IV 600, CAT III 1000 V
iFlex 2500 A AC
1000 V AC/DC
mV DC
60 kΩ
1000 μF

What’s Included:

18-inch iFlex flexible current probe – i2500-18
TL75 test leads
Coated instruction card
Safety information sheet
Soft carrying case
Two AA Alkaline batteries

Fluke 360 Leakage Current Clamp Meter

Rs.0

Feel free to contact us: Mobile: 0344 3813810 The Fluke 360 leakage tester is a rugged and accurate solution for leakage current measurement. Ideally designed for non-invasive checks of insulation condition, the Fluke 360 leakage meter allows you to perform tests without powering down the installation or disconnecting equipment – saving you time, without compromising on quality or safety. The unique jaw design of the Fluke 360 AC Leakage Current Clamp Meter eliminates the influence of adjacent current conductors, and measure leakage current down to 1 µA for monitoring of insulation and makes it ideal for checking insulation of low-voltage circuits and electrical components.. The ergonomic design of the Fluke 360 ensures easy measuring. The measuring clamp fits into tight spaces and the wide display angle clearly shows the measured value on the display after removing the clamp for the measured conductor. The Fluke 360 minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality jaw design of the Fluke 360 leakage tester guarantees high stability for long-term repeatability and durability. Why leakage current testing? Leakage currents can be an indicator of the effectiveness of insulation on conductors. High levels of leakage current may be present in circuits where either the insulation resistance is low, or electronic equipment with filters is used. Leakage currents can cause disruptions of the normal operation of equipment and installations. It is possible to locate the source of leakage currents by using the Fluke 360 leakage current clamp meter and taking methodical measurements throughout the installation. The big advantage of leakage current testing versus insulation testing is that the installation and equipment do not need to be powered down but can be done during normal operation. What’s Included:

Soft carrying pouch
Users manual in languages: English, French, Spanish, German, Italian, Portuguese, Simplified Chinese

Fluke 353 True-rms 2000 A Clamp Meter

Rs.0

Feel free to contact us: Mobile: 0344 3813810 Industrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential. In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing this product to meet CAT IV 600 V and CAT III 1000 V ratings. Confidently take reliable readings with the Fluke 353 AC/DC True-rms Clamp Meter – the tool of choice for high-current clamp-on amp meter measurements up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications and the extra rugged design has an extra element of user protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. Applications: Industrial plants and facilities Building maintenance, e.g. universities, hospitals, large offices, correctional institutions Plant works, e.g. power, pharmaceutical, printing, automotive assembly Manufacturing and process facilities Refineries Steel mills and other metal manufacturing plants Large DC systems such as DC electroplating, or marine electrical systems What’s Included: Fluke C43 Soft Carrying Case 6 AA batteries Users manual 3 year warranty

Fluke 345 Power Quality Clamp Meter

Fluke 345 Power Quality Clamp Meter

Rs.0

Feel free to contact us: Mobile: 0344 3813810

Ideal for VSDs, UPS, lighting
AC/DC with low pass filter
Data logging records results

2 Years Warranty

The Fluke 345 Power Quality Clamp Meter is Fluke’s newest power quality analyzer and is an ideal meter for commissioning and troubleshooting modern electrical loads. The Fluke 345 combines a power quality analyzer, digital clamp meter, oscilloscope, and data logger in one. This combination of functions, coupled with high quality digital filtering, makes it ideal for working with variable frequency motor drives, high efficiency lighting, and other loads using switching electronics. With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for measurements on switching loads such as variable speed drives, electronic lighting and UPS systems. Of course, the Fluke 345 is easy to use and will make the basic measurements of voltage and current to determine if there is something seriously wrong with the circuit under test. It’s rated for use at the service entrance with a 600 Volt CAT IV rating. With the 2000 A range and large jaw opening, you can evaluate most of the circuits in the building. The Fluke 345 can also measure both ac and dc voltage and current simultaneously, and identify the magnitude of each separately and combined as ac+dc true-rms. The Fluke 345 Power Quality Clamp Meter is the ideal tool for technicians and engineer involved in installing and commission switch electronic loads. It can deal with the difficult demands of measuring and monitoring variable frequency drives, UPS systems and other switching loads. It’s simply the ideal meter for commissioning and troubleshooting modern electrical loads. Additionally, the Hall Effect measurement system design makes measurement of dc current possible without the need to break the circuit with the power meter and the internal memory enables long-term logging for analysis of trends or intermittent problems. Applications: Setup and troubleshoot variable frequency drives and UPS systems – Verify correct operation by measuring key power quality parameters Harmonics measurements – Uncover harmonic issues that can damage or disrupt critical equipment Inrush capture – Check start-up current where spurious resets or nuisance circuit breaker tripping occurs Load studies – Verify electrical system capacity before adding loads What’s Included: 345 Power Quality Clamp Meter Soft carrying case Power Log software Test leads Alligator clips Test probes USB cable International ac adapter / battery eliminator Printed English language user manual Multi-language manual CD

Fluke 321 Digital AC Clamp Meter

Rs.0

Feel free to contact us: Mobile: 0344 3813810

Auto Power Off
Weight 230 g (8oz)
2 Years Warranty

Measure inrush motor starting current the way a circuit breaker sees it! Now everyone on your crew can have a Fluke Clamp Meter. This new smaller sized model offers accurate low current measurements, continuity test function and Fluke reliability. The Fluke 321 is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. This small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. This affordable instrument combine a compact package with a strong feature set: New smaller size fits easily into tight places Precise measurements with 1.8% basic accuracy Resolution up to 0.01A and 0.1 V Measures AC current to 400 A Measures AC volts to 600 V Resistance measurement to 400 Ω Continuity for quick checking of shorts Automatic low battery indicator Display hold function Two year warranty What’s Included: (2) AAA Alkaline batteries Instruction card Safety information sheet Soft carrying case Test leads

Fluke 1623 Basic GEO Earth Ground Tester Kit

Rs.0

The Fluke 1625 is intended for electrical utility or other high frequency environments as it has extra versatility for more demanding applications. The Fluke 1625 is a distinctive earth ground tester that can perform all four types of earth ground measurement. Not only measure ground resistance using the classic ‘fall of potential test’ but also enable time saving testing using the ‘selective’ and ‘stakeless’ methods. ‘Selective’ testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple ‘stakeless’ method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test. Testing Methods

3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
4-Pole Soil Resistivity testing – determine soil resistivity using four ground stakes
Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.

The Fluke 1625 offers these advanced features:

Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
Adjustable limits – for quick test result verification.

Earth ground resistance and soil resistivity should be measured when:

Designing earth ground systems
Installing new ground system and electrical equipment
Periodically testing ground and lightning protection systems
Installing large electrical equipment such as transformers, switchgears, machines, etc.

The Fluke 1625 is the stand-alone unit For a basic model see the Fluke 1623 What’s Included:

Fluke 1625 tester
2 test leads
2 alligator clips
4 earth ground stakes
3 cable reels with wire (2-25 m, 1-50 m)
selective/stakeless clamp set (one inducing, one sensing)
Batteries
Users manual
Rugged carrying case

Fluke 1621 Earth Ground Tester Kit

Rs.0

The Fluke 1621 earth ground tester is an easy-to-use earth ground tester. For ground resistance testing, the 1621 is the first line of defense in detecting reliable ground connections. The unit features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance tests. Its convenient size, rugged holster, and large, clear LCD display make it an ideal field earth ground tester, for most electrical grounding work environments. With a simple user interface and intuitive functionality, the Fluke 1621 is a handy grounding tool for electrical contractors, utility test engineers, and earth ground specialists. What’s Included:

Fluke 1621 Tester
2 cable reels with wire (1-50m, 1-25m)
3 earth ground stakes
1 Test lead (red and black 2m)
2 Alligator Clips
Batteries
Users manual
Hard carrying case

Fluke 179/EDA2 Electronic’s Multimeter and Deluxe Accessory Combo Kit

Rs.0

Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair. The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record. The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. Check the features and specifications using the tabs above. Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. Available as kits such as: Fluke 179/1AC-IIElectrician’s Multimeter and Voltage Tester Combo Kit or Fluke 179/61 Industrial Multimeter and Infrared Thermometer Combo Kit or Fluke 179/TPAK Digital Multimeter & ToolPak™ Combo Kit Also available with no temperature asFluke 177or as Fluke 175 Combo Kit includes:

Fluke 179 True-rms Digital Multimeter
Fluke 80BK K-type temperature probe
Fluke AC280 SureGrip Heavy Duty Hook Clips
Fluke TP910 Electronic Test Probes
Fluke TL224 SureGrip Silicone Test Leads resist heat
Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
NEW! Fluke C35 lightweight soft case to provide optimal protection and storage

What’s Included:

Fluke 179 True-rms Digital Multimeter
Fluke 80BK K-type temperature probe
Fluke AC280 SureGrip Heavy Duty Hook Clips
Fluke TL910 Electronic Test Probes
Fluke TL224 SureGrip Silicone Test Leads resist heat
Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
NEW! Fluke C35 lightweight soft case to provide optimal protection and storage

The Fluke 1621 earth ground tester is an easy-to-use earth ground tester. For ground resistance testing, the 1621 is the first line of defense in detecting reliable ground connections. The unit features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance tests. Its convenient size, rugged holster, and large, clear LCD display make it an ideal field earth ground tester, for most electrical grounding work environments. With a simple user interface and intuitive functionality, the Fluke 1621 is a handy grounding tool for electrical contractors, utility test engineers, and earth ground specialists. What’s Included:

Fluke 1621 Tester
2 cable reels with wire (1-50m, 1-25m)
3 earth ground stakes
1 Test lead (red and black 2m)
2 Alligator Clips
Batteries
Users manual
Hard carrying case

Fluke 87V/E2 Industrial Electrician’s Combo Kit

Rs.0

Feel free to contact us: Mobile: 0344 3813810

The Fluke 87V offers accuracy and diagnostics for maximum industrial productivity in the tool box or on the bench. The Fluke 87V multimeter has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. With its newly incorporated selectable low pass filter, the Fluke 87V allows troubleshooters to take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or the motor terminals. The Fluke 87V/E2 Industrial Electrician Combo Kit makes troubleshooting more productive with standard meter hanging accessory for handsfree operation, soft case for protection and storage, 1.5 m heat resistant silicone test leads and more. Features for maximum productivity

Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Large digit display with bright, two-level backlight

Electrical safety All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. See the Fluke 87V – Industrial True-rms Multimeter with Temperature Also available in an average responding multimeter, Fluke 83V What’s Included:

Fluke 87V Industrial Multimeter
Fluke AC220 retractable long reach alligator clips
Fluke C35 lightweight soft case to provide optimal protection and storage
Fluke TPAK ToolPak meter haning accessory to hold meter to steel surfaces
Fluke TL224 1.5 m silicone leads resist head
Fluke TP238 removable probes with 4 mm of exposed metal to use on industrial circuits
9V battery (installed)
Getting Started Manual
CD with detailed manual
Fluke 80BK K-type temperature probe

Fluke 88V/A Automotive Multimeter Combo Kit

Rs.0

Feel free to contact us: Mobile: 0344 3813810

A complete automotive diagnostic package with everything you need in an automotive multimeter The new Fluke 88V has improved measurement functions, troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles. The 88V is made in the U.S.A. and carries the industry leading lifetime warranty. The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection. Combo Kit Includes: 88V multimeter, TL224 silicone test leads, AC285 long reach alligator clips, TP220 test probes, RPM 80 inductive RPM pick-up, magnet and strap, 80BK temperature probe, two automotive backprobe pins, insulation piercing probe, C800 durable carrying case, holster, 9V battery (installed), Getting Started Manual, and CD with detailed manual. The new 88V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes. What’s Included:

Fluke 88V Automotive Multimeter
Fluke TL224 Heat Resistant Silicone Test Leads
Fluke TP220 Removable Sharp Point Test Probes
Fluke AC285 Large Jaw Alligator Clips
Fluke TPAK Magnetic Hanger
Fluke 80BK Temperature Probe
Fluke RPM80 Inductive Pick-up
Automotive Backprobe Pins
Insulation Piercing Probe
Packaged in a durable carrying case (Fluke C800)

Fluke 116/62 HVAC Multimeter and IR Thermometer Combo Kit

Rs.0

Feel free to contact us: Mobile: 0344 3813810

For the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician’s Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case. 3-year product warranty on Fluke-116 DMM, 2-year warranty on Fluke-62 IR Thermometer and 1-year warranty on accessories What’s Included:

Fluke 116 HVAC Multimeter with Temperature and Microamps
Fluke 62 Infrared Thermometer
Fluke TL75 Hard Point Test Lead Set
Fluke TPak ToolPak Magnetic Meter Hanging Strap
NEW! Fluke C115 Deluxe carrying case with shoulder strap
Fluke 80BK Integrated Temperature Probe
Fluke 80AK Thermocouple Adapter
NEW! Fluke 80PK-11 Pipe Wrap Thermocouple