- True-rms ac voltage and current for accurate measurements on non-linear signals
- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 μF capacitance range
- Frequency to 50 kHz
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Resistance, continuity and diode test
- Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
- The removable magnetic display can be conveniently mounted where it is easily seen
- Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
- Use as a conventional multimeter when the display is connected
- Radio transmitter automatically turns off when the display is connected to the meter
- Auto power off maximizes battery life
- Min/Max and Average recording to capture variations automatically
- Test continuity and diodes
- Easy to read display with large digits and bright backlight
- Battery life approximately 400 hours
-
Feel free to contact us: Mobile: 0344 3813810 The NEW Fluke 233 True-rms Remote Display Digital Multimeter gives you ultimate flexibility in unusual measurement scenarios. Place the removable display where you can see it and then put the meter where it is convenient for you—no more juggling of leads and the meter while stretching into a tight spot. You can now take measurements in hard-to-reach places, where machines or panels are physically separated from a limit or isolator switch, or in user prohibited areas such as clean rooms or hazardous areas. Imagine the possibilities! What would you do if you could be in two places at once? -
Feel free to contact us: Mobile: 0344 3813810 Fluke 225C ScopeMeter is based on the 199C Color ScopeMeter. It includes all the key functionalty of that product but also includes the popular Bus Health Test feature of the Fluke 125 ScopeMeter. Bus Health Test offers powerful test capabilities for a wide variety of Industrial Bus systems. When in Bus Health Test mode, the Fluke 225C automatically makes an analysis of the electrical signals passing through the bus, and compares the parameters to industry standard values for that bus type. Alternatively, the user may select an ‘Eyepattern’ display to visually check the overall signal quality. Parameters are automatically qualified as ‘good’, ‘weak’ or ‘bad’ based on a comparison to the appropriate industrial standards or to user set reference values. Each of the measured parameters is presented with momentary value and with statistical minimum and maximum values measured over time. The reference values used are also displayed, to give the user an easier grip on the systems behavior. Tested parameters include signal amplitudes, bias voltage, rise- and fall-times, jitter, distortion and noise levels (in-band noise as well as out-of-band noise) depending on the requirements of the associated industry standard. Because the Fluke 225C ScopeMeter is based on the Fluke 199C ScopeMeter, it also offers 2Gs/S and 200MHz bandwidth. The Fluke 225C is also available as a kit which includes software, communications cable and carry case – this product is called the Fluke 225C/003S. -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 The new Fluke 190-102 Series II ScopeMeter is a 2-channel portable hand held oscilloscope built for CAT III & IV environments. It easily works with 3-phase applications for many industrial applications like motors and variable speed drives and includes all the key features of the original Fluke 190 series ScopeMeters. The Fluke 190-102/AM model is a 100MHz bandwidth model that provides real-time sampling rates up to 1.25GS/s and a 400ps resolution to capture noise and other disturbances.Applications
- Automation: PLC’s, sensors, transducers, motion controllers, rotary encoders, scanners, readers, printers
- Medical Imaging: XRay, MRI, ultrasound imaging equipment
- Avionics: Flight line navigation systems, communication systems, radars, on board aircraft control systems
- A/V and Security Systems: Retail security devices, surveillance and monitoring equipment, RFID
Fluke 190 Series II ScopeMeters
The new 2-channel Fluke 190 series of portable oscilloscopes are designed for the industrial plant maintenance professionals servicing, installing or maintaining heavy duty electrical equipment, electro-mechanical machinery and plant automation control systems. The 190 series II ScopeMeters are the first portable oscilloscopes with a 1000 V CAT III / 600 V CAT IV safety rating. Fluke ScopeMeter test tools are hand held, battery operated portable instruments with a sealed, dust and drip proof case that is IP 51 rated, designed to be used in harsh environments. The new Fluke 190 series II now includes new features for troubleshooting today’s industrial power electronic systems and enhancements that will improve usability and overall satisfaction.New Features and Functions for Industrial Equipment Maintenance Applications
- IEC 61010 1000V CAT III / 600V CAT IV Safety rating
- 2 fully isolated floating input channels with up to 1.25 GS/s real time sampling rate
- 8ns Glitch detect
- 10,000 sample deep memory per channel for displaying high resolution waveform details
- 2 input channels provide: 2 meter measurements, 2 TrendPlot traces, 2 ScopeRecord traces, capturing or logging 2 inputs over time
- Live Zoom with full resolution
- Hi-capacity Li-ion battery with up to four hours of operation
- Battery access door to easily swap out batteries for extended operation
- Two electrically isolated USB ports. Mini USB-A for PC connectivity and a USB memory device port
- Security slot to lock down instrument using standard Kensignton PC lock
- Screen insert for standard camera mounting accessories
- Up to 100 MHz bandwidth, 1.25 GS/s real time sample rate up to 400 pico seconds resolution
- Built-in multimeter
- Connect and View to easily trigger on and display even complex waveforms
- TrendPlot and ScopeRecord to capture or plot waveforms and measurements over extended time spans
- Reply Last 100 Screen, to go back in time to see waveform anomalies
- Environmentally tested to meet IP51 dusty and drip proof rating and withstand 3G vibration or 30g shock
Other Fluke 190 Series II (2 Channel) models:
- Fluke 190-102/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke 190-062/AM – This is the 60MHz series model
- Fluke 190-062/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke 190-202/AM – This is the 200MHz series model
- Fluke 190-202/AM/S – This model includes the Fluke C290 hard case and full version of FlukeView for ScopeMeter software
- Fluke BC190 Power adapter
- Fluke BP290 Li-ion battery pack
- VPS410-R probe red
- VPS410-B probe blue
- USB cable A – B (mini)
- Hanging strap
- Handstrap affixed to instrument (user selectable for left or right handed use)
- CD user manual with FlukeView ScopeMeter software demo version
- Statement of calibration practice
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair. The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record. The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. Check the features and specifications using the tabs above. Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. Available as kits such as: Fluke 179/1AC-IIElectrician’s Multimeter and Voltage Tester Combo Kit or Fluke 179/61 Industrial Multimeter and Infrared Thermometer Combo Kit or Fluke 179/TPAK Digital Multimeter & ToolPak™ Combo Kit Also available with no temperature asFluke 177or as Fluke 175 Combo Kit includes:- Fluke 179 True-rms Digital Multimeter
- Fluke 80BK K-type temperature probe
- Fluke AC280 SureGrip Heavy Duty Hook Clips
- Fluke TP910 Electronic Test Probes
- Fluke TL224 SureGrip Silicone Test Leads resist heat
- Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
- NEW! Fluke C35 lightweight soft case to provide optimal protection and storage
- Fluke 179 True-rms Digital Multimeter
- Fluke 80BK K-type temperature probe
- Fluke AC280 SureGrip Heavy Duty Hook Clips
- Fluke TL910 Electronic Test Probes
- Fluke TL224 SureGrip Silicone Test Leads resist heat
- Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
- NEW! Fluke C35 lightweight soft case to provide optimal protection and storage
- Fluke 1621 Tester
- 2 cable reels with wire (1-50m, 1-25m)
- 3 earth ground stakes
- 1 Test lead (red and black 2m)
- 2 Alligator Clips
- Batteries
- Users manual
- Hard carrying case
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 Record three-phase power quality and monitor for power quality disturbances with the new Fluke 1750 Three Phase Power Recorder and the Fluke Power Analyzer software. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Never miss capturing a disturbance – with the exclusive threshold-free measurement system, it’s automatic. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Three Phase Power Recorder. Unprecedented accuracy and resolution provide complete visibility into your distribution system. The recorder automatically detects, scales, and powers current probes without needing batteries. Requiring only single-lead voltage connections enables safe and quick setups. Once power is applied the instrument automatically begins recording and LEDs give you assurance that the recorder is powered up and signals are within range – no more uncertainty that data is being recorded. The Fluke 1750 Three Phase Power Quality Recorder has an exclusive capture algorithm which makes certain all events are captured without the tedious setups and blind spots associated with threshold driven equipment. The PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams. The built-in wireless technology allows you to control multiple instruments from a distance easily, without the need for a laptop computer (laptops can also be used when desired). Applications: Long-term analysis: Uncover hard-to-find or intermittent issues Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports Quality of service compliance: Validate incoming power quality at the service entrance Semi-permanent monitoring: Monitor critical equipment, capturing power quality events to correlate with equipment malfunctions What’s Included:- 1750 aquisition unit
- PDA wireless “front panel interface” and charger power plug adapters
- 4 – 400A current probes (3140)
- 5 Test leads and clips
- SD memory card
- Fluke Power View and Fluke Power Analyze software
- Power cord with international plug set
- Ethernet cable
- Color localization set
- Printed Getting Started manual
- Product CD with software and user manual PDF
-
Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair. The Fluke 175 True-rms digital multimeter has the features needed to find most electrical, electronic, electro-mechanical and heating and ventilation problems. Simple to use with significant improvements like True-rms, frequency, capacitance and min-max record. Check the features and specifications using the tabs above. Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. Want better accuracy and a backlight see the Fluke 177 Also available with temperature as Fluke 179 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues. The Fluke 1743 is a powerful three-phase power quality logger capable of logging the most common power parameters you’ll need for power quality monitoring such as:- V, A, W, VA, VAR
- Power Factor
- Energy
- Flicker
- Voltage
- THD
- The Fluke 1744 includes the same features as the Fluke 1743 but can measure voltage and current harmonics, interharmonics, mains signaling, unbalance and frequency.
- The Fluke 1745 includes the same features as the Fluke 1744 but features an IP50 environmental rating, a real-time LCD display and a 5 hour UPS which is great if you need to read more data at the meter and have a longer backup battery life where there’s less chance of it getting wet.
- Disturbance analysis – Uncover root cause of equipment malfunction for later mitigation and predictive maintenance
- Quality of service compliance – Validate incoming power quality at the service entrance
- Power quality studies – Assess baseline power quality to validate compatibility with critical systems before installation
- Load studies – Verify electrical system capacity before adding loads
- Energy and power quality assessment – Validate performance of facility improvements by quantifying energy consumption, power factor, and general power quality before and after improvements
- 4 Flexible probes 15/150/1500/3000 A with 2 m cable
- CD-ROM with PQ Log software
- RS232 interface cable and RS232-USB adapter
- Test leads for voltages and power supply
- 4 black dolphin clips
- Color localization kit
- Carrying bag
- Test certificate with measurement values
- Printed English manual
- Multi-language manual CD
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging. The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more. With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues. Set up the 1735 in seconds, with the included flexible current probes and color display. The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application. The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button. Applications:- Load studies – verify electrical system capacity before adding loads
- Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
- Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment
- Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 1735 Three Phase Power Logger is the idea tool for electrical load studies, energy consumption testing and general power quality logging. The Fluke 1735 logs most critical three-phase power parameters plus harmonics and captures voltage events. The Fluke 1735 can log rms voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more. With memory for up to 45 days of data, the 1735 can uncover intermittent or hard-to-find issues. Set up the 1735 in seconds, with the included flexible current probes and color display. The four current probes are connected with one plug, the instrument automatically detects, scales and powers the probes. These variable range current probes are easily set to 15 A, 150 A, or 3000 A for high accuracy in nearly any application. The voltage connections are single leads, enabling easy and quick setups. The color screen provides instant confirmation that connections are correct, and then logging begins when you press the RECORD button. Applications:- Load studies – verify electrical system capacity before adding loads
- Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
- Harmonics measurements – uncover harmonic issues that can damage or disrupt critical equipment
- Voltage event capture – monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping
-
The Fluke 1625 is intended for electrical utility or other high frequency environments as it has extra versatility for more demanding applications. The Fluke 1625 is a distinctive earth ground tester that can perform all four types of earth ground measurement. Not only measure ground resistance using the classic ‘fall of potential test’ but also enable time saving testing using the ‘selective’ and ‘stakeless’ methods. ‘Selective’ testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple ‘stakeless’ method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test. Testing Methods- 3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
- 4-Pole Soil Resistivity testing – determine soil resistivity using four ground stakes
- Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
- Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
- Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
- R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
- Adjustable limits – for quick test result verification.
- Designing earth ground systems
- Installing new ground system and electrical equipment
- Periodically testing ground and lightning protection systems
- Installing large electrical equipment such as transformers, switchgears, machines, etc.
- Fluke 1625 tester
- 2 test leads
- 2 alligator clips
- 4 earth ground stakes
- 3 cable reels with wire (2-25 m, 1-50 m)
- selective/stakeless clamp set (one inducing, one sensing)
- Batteries
- Users manual
- Rugged carrying case