- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)10,000 μF capacitance range
- Frequency to 200 kHz
- Extended ac voltage bandwidth – 40 Hz to 30 kHz
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- Peak min-max
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
- True-rms ac voltage and current for accurate measurements on non-linear loads
- Hi resolution 20,000 count display mode
- Backlit keypad buttons allow for easy visibility in lowlit areas
- Large display digits and 2 level bright white backlight for increased visibility
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- Long battery life (800 hours)
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
- MSHA approval (pending)
-
Feel free to contact us: Mobile: 0344 3813810 The Fluke 28-II multimeter is the new standard for rugged Fluke 28 II digital multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Fluke 28-II has an IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. This meter is built to work in the toughest environments. -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 The industrial meter for demanding users. New diagnostic functionality for maximizing productivity in the plant. The new Fluke 289 True-RMS Industrial Logging Multimeter with TrendCapture is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off solving other problems. Be sure to also check out the Fluke 287 True-RMS Electronics Logging Multimeter with TrendCapture designed for electronics professionals or the Fluke 289 and Fluke i400 Clamp Meter Combo Kit APPLICATIONS:- Install or maintaining electronic machinery/plant equipment
- Testing adjustable speed motor drives
- Log and record results
- In-plant automation applications
- Power distribution
- Electro-mechanical equipment service
- Industrial electronics
- Manual
- 6 AA Batteries, installed
- TL71 Silicone Test Leads
- Probe Holder
- Two AC72 Alligator Clips
- Registration Card
- Cal Practices Document
- CD-ROM Users’ Manual (16 languages)
- Getting Started Manual
- Calibration Certification Sheet
-
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 -
Feel free to contact us: Mobile: 0344 3813810 Versatile meter for maintenance, field service and bench repair. The Fluke 179 True-rms digital multimeter has the features needed to find most electrical and HVAC problems. Simple to use with significant improvements like True-rms, frequency, capacitance, temperature and min-max record. The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. Check the features and specifications using the tabs above. Electrical safety All inputs are protected to measurement CAT III 1000 V and CAT IV 600V. This meter can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. Available as kits such as: Fluke 179/1AC-IIElectrician’s Multimeter and Voltage Tester Combo Kit or Fluke 179/61 Industrial Multimeter and Infrared Thermometer Combo Kit or Fluke 179/TPAK Digital Multimeter & ToolPak™ Combo Kit Also available with no temperature asFluke 177or as Fluke 175 Combo Kit includes:- Fluke 179 True-rms Digital Multimeter
- Fluke 80BK K-type temperature probe
- Fluke AC280 SureGrip Heavy Duty Hook Clips
- Fluke TP910 Electronic Test Probes
- Fluke TL224 SureGrip Silicone Test Leads resist heat
- Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
- NEW! Fluke C35 lightweight soft case to provide optimal protection and storage
- Fluke 179 True-rms Digital Multimeter
- Fluke 80BK K-type temperature probe
- Fluke AC280 SureGrip Heavy Duty Hook Clips
- Fluke TL910 Electronic Test Probes
- Fluke TL224 SureGrip Silicone Test Leads resist heat
- Fluke TPAK ToolPak meter hanging accessory to hold meter to steel surfaces
- NEW! Fluke C35 lightweight soft case to provide optimal protection and storage
- Fluke 1621 Tester
- 2 cable reels with wire (1-50m, 1-25m)
- 3 earth ground stakes
- 1 Test lead (red and black 2m)
- 2 Alligator Clips
- Batteries
- Users manual
- Hard carrying case
-
The Fluke 1621 earth ground tester is an easy-to-use earth ground tester. For ground resistance testing, the 1621 is the first line of defense in detecting reliable ground connections. The unit features basic ground testing methods including 3-pole Fall-of-Potential as well as 2-pole ground resistance tests. Its convenient size, rugged holster, and large, clear LCD display make it an ideal field earth ground tester, for most electrical grounding work environments. With a simple user interface and intuitive functionality, the Fluke 1621 is a handy grounding tool for electrical contractors, utility test engineers, and earth ground specialists. What’s Included:- Fluke 1621 Tester
- 2 cable reels with wire (1-50m, 1-25m)
- 3 earth ground stakes
- 1 Test lead (red and black 2m)
- 2 Alligator Clips
- Batteries
- Users manual
- Hard carrying case
-
The Fluke 1625 is intended for electrical utility or other high frequency environments as it has extra versatility for more demanding applications. The Fluke 1625 is a distinctive earth ground tester that can perform all four types of earth ground measurement. Not only measure ground resistance using the classic ‘fall of potential test’ but also enable time saving testing using the ‘selective’ and ‘stakeless’ methods. ‘Selective’ testing does not require the electrode under test to be disconnected during the measurement, thus increasing safety. The simple ‘stakeless’ method quickly checks ground connections using two current transformers (probes) clamped around the ground conductor under test. Testing Methods- 3- and 4-Pole Fall of Potential – standard earth ground testing using two ground stakes
- 4-Pole Soil Resistivity testing – determine soil resistivity using four ground stakes
- Selective testing – without disconnecting ground rods, a technician can measure ground resistance using a combination of stakes and a clamp.
- Stakeless testing – innovative solution using only clamps, instead of ground stakes, to measure earth ground loop resistance.
- Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing a more accurate earth ground value.
- R* measurement – calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to-earth ground would see.
- Adjustable limits – for quick test result verification.
- Designing earth ground systems
- Installing new ground system and electrical equipment
- Periodically testing ground and lightning protection systems
- Installing large electrical equipment such as transformers, switchgears, machines, etc.
- Fluke 1625 tester
- 2 test leads
- 2 alligator clips
- 4 earth ground stakes
- 3 cable reels with wire (2-25 m, 1-50 m)
- selective/stakeless clamp set (one inducing, one sensing)
- Batteries
- Users manual
- Rugged carrying case