• Functions : Relative humidity, dew point and temperature. 8, 000 measuring points DATALOGGER software (option)
  • Functions : Velocity, airflow, temperature. 8, 000 measuring points DATALOGGER software (option) Anemometer
    • Ø 70 mm vane : from 0,3 to 35 m/s
    • Ø 100 mm : from 0,25 to 35 m/s
    • Ø 14 mm : from 0,8 to 25 m/s
    • hotwire : from 0,15 to 30 m/s
  • PRODUCT DETAILS

    • Dual Outputs: Facilitates intelligent distribution of power.
    • Higher PV Input Current: Accepts up to 27A for improved solar energy use.
    • Extensive PV Input Voltage Spectrum: Spans from 90VDC to 450VDC.
    • RGB Lighting for Status: Offers intuitive system status indicators.
    • Integrated Wi-Fi: Enables monitoring on-the-go via Android/iOS App.
     
  • Out of stock

    PRODUCT DETAILS

    • Load management with twin output capability
    • Visual feedback through multi-colored LED illumination
    • Autonomous operation without reliance on batteries
    • Integrated dust prevention system
  • PRODUCT DETAILS

    • Pure sine wave output
    • Buil in MPPT charge controller
    • Detachable LCD panel
    • Self-Consumption and Feed in to the grid
  • PRODUCT DETAILS

    • Pure sine wave output
    • Buil in MPPT charge controller
    • Detachable LCD panel
    • Self-Consumption and Feed in to the grid
  • PRODUCT DETAILS

    • Pure sine wave output
    • Buil in MPPT charge controller
    • Detachable LCD panel
    • Self-Consumption and Feed in to the grid
  • PRODUCT DETAILS

    • Pure sine wave output
    • Buil in MPPT charge controller
    • Detachable LCD panel
    • Self-Consumption and Feed in to the grid
  • PRODUCT DETAILS

    • Large touch screen
    • Buil-in WIFI option for mobile monitoring
    • Adjustable charging current and voltage
    • Load management with twin output capability.
  • PRODUCT DETAILS

    • Pure sine wave output
    • Buil in MPPT charge controller
    • Detachable LCD panel
    • Self-Consumption and Feed in to the grid
  • PRODUCT DETAILS

    • Easy Maintenance
    • Battery independent design
    • IP65 water and dust proof
    • Dual Outputs
  • PRODUCT DETAILS

    • Easy to install
    • Reliable
    • IP65 rating
    • Parallel Operation with 6 Units
    • Replaceable Fan Design
  • PRODUCT DETAILS

    • IP65 Rating: Resistant to water and dust
    • Dual Output: Intelligent management of power loads
    • Battery-Free Operation: Works independently of a battery
    • Adjustable High Charging Current: Choose your preferred charging power level
  • Sale!

    LED Flood Light 150w ( 30W to 210W In stock )

    Original price was: Rs.24,000.Current price is: Rs.22,000.
    General Description:
    LED  Floodlights is specially designed for high power lighting. This product is available in 30W  210W .It can be used in tunnel, advertising, scenic spot and so on. There are many functions which are popular and accepted by the clients, such as fashionable outlook, easy installation, free maintenance, excellent color uniform and good heat dissipation etc.
    Product Characteristics:
    1. High grade LED from BRIDGELUX, MEANWHILE,SUMSUNG,EPPISTAR
    2. High power efficiency output, Non-image optics system
    3. Special design
    4. High efficiency driver system
    5. Luminaire efficiency up to 90 lm/W ± 3lm
    6. Open air ventilation design, good heat dissipation function
    7. Innovative and unique design of clip plate, can fit different diameter of the pole, compatible with any install solution, to meet the demands of changing or upgrading of conventional road lighting.
    8. "Tool free" locking design to open and close the driver compartment simply, easy installation and maintenance
    9.Colour Temperature: Warm and Cool 3500k, 6500k
    1-year warranty since goods depart from factory.
    Feel free to contact us: Mobile: 030 77 381 381
  • Range:0-99,999 Inches or Centimeters The Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Operation – LMI-S / LMC-S In “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
  • Range:0-99,999 Inches or Centimeters The Check-Line LM Series Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder. LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured Two LM types are offered: Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter. Operation – LMI-S / LMC-S In “Auto” mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (from 1- 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
Go to Top